Home › Flooring

Luxury Vinyl Plank Flooring Installation Cost Guide

By HouseCostWise Editorial Team · Published October 11, 2026 · 5 sources

Typical US range, per square foot
$4 – $16
Low
$4
High
$16
Ranges come from the published sources listed at the end of this guide.

HomeGuide’s average for luxury vinyl tile and plank, installation included, is $4 to $16 per square foot. This Old House puts 200 square feet of standard vinyl plank at $1,000 to $3,400 including materials and labor. Actual quotes move with the plank type, the room, and the shape of your subfloor.

Luxury vinyl plank cost breakdown

Scope Cost Source
200 sq. ft. installed, standard vinyl plank $1,000 to $3,400 This Old House
200 sq. ft., 12 mil LVP, matte finish (project low) $600 Fixr
200 sq. ft., 40 mil LVP, exotic pattern (project high) $3,200 Fixr
Installed, with labor $2.50 to $13 per sq. ft. Forbes Home
Installation labor only $1.50 to $6 per sq. ft. Fixr
Plank flooring itself $2 to $7 per sq. ft. Bob Vila
Remove and dispose of old flooring $1 to $2 per sq. ft. This Old House
Baseboards $5.50 to $11.00 per piece HomeGuide

Fixr lists Mohawk LVP at $2 to $4 per square foot and Shaw LVP at $3 to $6. See our flooring cost guides to compare vinyl with other floors.

Cost by room

HomeGuide gives room totals that depend on the square footage: a bathroom runs $70 to $800 and a kitchen $400 to $3,200. A basement ranges from $1,200 to $32,000 because spaces vary so much in size. Forbes Home puts installation at $250 to $4,600 per room across all kinds of rooms.

Cost by installation method

Forbes Home reports that interlocking vinyl costs $3 to $13 per square foot, and that glue-down vinyl costs $2.50 to $13 on average. Bob Vila prices gluing down individual planks at $3 to $11 per square foot. Bob Vila lists WPC core planks at $3.50 to $12 per square foot for the materials.

Labor vs. materials

Bob Vila puts the plank flooring itself at about $2 to $7 per square foot and says labor adds $1 to $4 per square foot, with installers around $36 an hour. Fixr’s labor-only range is lower than the all-in average, since it excludes the planks themselves.

DIY vs. hiring a pro

This Old House says doing it yourself costs $400 to $1,400 for materials alone on 200 square feet. Click-lock and glue-down jobs both need a flat, clean subfloor, so check the floor before you decide. Remember to include trim, transition pieces, and underlayment in a DIY budget, since the materials figure covers planks only. If the old floor may contain asbestos, stop and have it tested by a licensed professional before removing it.

Ways to save

How to get an accurate quote

Ask installers to measure each room and inspect the subfloor in person, including checking for moisture or uneven spots, which can add prep work to the job. The written quote should separate materials from labor and say what it includes for subfloor prep, underlayment, transitions, and cleanup. Verify the contractor’s license and insurance before you sign.

What changes the price

Frequently asked questions

How much does LVP installation cost per square foot?

HomeGuide's all-in average is the highest-level figure; Fixr and Bob Vila break labor out separately, as shown in the table and labor section above.

How much does it cost to remove old flooring first?

This Old House prices removal and disposal per square foot, as noted above.

How much does LVP cost for a bathroom or kitchen?

HomeGuide gives $70 to $800 for a bathroom, depending on its size, and $400 to $3,200 for a kitchen.

Sources

Related cost guides

Figures are estimates based on the sources above and vary by region, home and contractor. Get at least three written quotes before you hire. See our disclaimer and how we research.