All guides

Towel Warmers

Best Wall Mounted Towel Warmer for Bathroom (2026): 5 Picks Compared

As an Amazon Associate we earn from qualifying purchases. Specs below come from each product's Amazon listing; we do not test products in person.

For a wall-mounted towel warmer for the bathroom, the Colliford leads this list: it pairs 6 stainless steel bars with a touchscreen, a timer and a choice of hardwired or plug-in installation. The HEATGENE follows with 12 bars, the most here, while the Pursonic matches the Colliford at 6 bars with plug-in setup.

Starting out? See the main guide: Best Towel Warmer

Top picks at a glance

  1. Colliford Towel Warmer 6 Bars 9.8 View on Amazon
  2. Pursonic TW300 Towel Warmer Rack for Bathroom 9.6 View on Amazon
  3. AyiDrmjj Heated Towel Rack with Shelf Timer 9.5 View on Amazon
  4. HEATGENE Towel Warmer for Bathroom 9.4 View on Amazon
  5. XBVV Gold Heated Towel Rack for Bathroom 9.2 View on Amazon

Compare the specs

Ranked on bars, timer, stainless steel from each listing, plus how many buyers have rated it. A dash (—) means we could not confirm that figure from the listing.

PickBarsTimerInstall typeStainless steelWeightWarranty
1. Colliford Towel Warmer 6 Bars6 barsYeshardwired or plug-inYes——
2. Pursonic TW300 Towel Warmer Rack for Bathroom6 bars—plug-in———
3. AyiDrmjj Heated Towel Rack with Shelf Timer10 barsYes————
4. HEATGENE Towel Warmer for Bathroom12 bars—plug-in or hardwiredYes——
5. XBVV Gold Heated Towel Rack for Bathroom4 bars——Yes——
1. Best Overall9.8/10
Colliford Towel Warmer 6 Bars

Colliford Towel Warmer 6 Bars

It pairs 6 stainless steel bars with a touchscreen timer, hardwired or plug-in installation and a temperature range from 115 to 155 degrees.

  • Bars: 6 bars
  • Timer
  • Install type: hardwired or plug-in
  • Stainless steel
Check it on Amazon

Good for

  • Buyers who want a touchscreen with a timer
  • Buyers who want hardwired or plug-in installation

Skip it if

  • You want more than 6 bars
  • You want heating times longer than 9 hours

The touchscreen sets temperature from 115 to 155 degrees and heating times from 1 to 9 hours. It installs hardwired or plug-in, and the built-in thermostat controls temperature. It is a 26-inch rack with a black finish.

2. Runner-Up9.6/10
Pursonic TW300 Towel Warmer Rack for Bathroom

Pursonic TW300 Towel Warmer Rack for Bathroom

It pairs 6 bars with plug-in setup and a reach of 122 degrees within about 30 minutes.

  • Bars: 6 bars
  • Install type: plug-in
Check it on Amazon

Good for

  • Buyers who want plug-in setup with no hardwiring
  • Buyers who want wall-mounted or freestanding setup

Skip it if

  • You want more than 6 bars
  • You want heat above 122 degrees

It uses 6 bars with wall-mounted or freestanding setup, using brackets and hardware or freestanding feet. It plugs into a standard outlet with no hardwiring, and it reaches 122 degrees within about 30 minutes. It runs continuously for warm, dry towels, with minimal electricity use like a light bulb.

3. Also Great9.5/10
AyiDrmjj Heated Towel Rack with Shelf Timer

AyiDrmjj Heated Towel Rack with Shelf Timer

It pairs 10 bars with a folding heated shelf, hooks and an LED timer panel.

  • Bars: 10 bars
  • Timer
Check it on Amazon

Good for

  • Buyers who want 10 bars for multiple towels
  • Buyers who want a heated shelf for small garments

Skip it if

  • You want more than 10 bars
  • You want a rack under 10 bars

It uses 10 bars with a folding heated shelf on top and hooks at the bottom for small accessories. The LED panel sets temperature and a timer, and the rack holds multiple towels at once. It mounts on the wall with a no-punching option for walls without holes, and the power cord sits on the right-hand side.

4. Most Bars9.4/10
HEATGENE Towel Warmer for Bathroom

HEATGENE Towel Warmer for Bathroom

It pairs 12 curved bars with 304 stainless steel, overheat protection and plug-in or hardwired installation.

  • Bars: 12 bars, the most here
  • Install type: plug-in or hardwired
  • Stainless steel
Check it on Amazon

Good for

  • Buyers who want 12 bars for two bath towels
  • Buyers who want a 24 by 40 inch layout

Skip it if

  • You want more than 12 bars
  • You want a warmer under 140 watts

It uses 12 curved bars in a 24 by 40 inch layout with room for up to two bath towels or robes. It draws 140 watts, and it plugs into a standard outlet or installs hardwired, with a wall plate for hardwired installation sold separately. It is made from 304 stainless steel with overheat protection, and installation hardware and instructions are included.

5. Also Great9.2/10
XBVV Gold Heated Towel Rack for Bathroom

XBVV Gold Heated Towel Rack for Bathroom

It pairs 4 stainless steel bars with a built-in timer, temperature control and plug-in installation.

  • Bars: 4 bars
  • Stainless steel
Check it on Amazon

Good for

  • Buyers who want a gold 4-bar rack
  • Buyers who want fast heat-up in 15 minutes

Skip it if

  • You want more than 4 bars
  • You want heat above 120 degrees

It uses 4 stainless steel bars in gold with plug-in installation and all hardware and tools included. It is rated at 48 watts and heats up in 15 minutes to 113 or 120 degrees depending on room temperature. It has a built-in timer and temperature control, with IP56 and overheat protection.

How to choose

Bars and size

Bar count sets how many towels a rack holds at once. The HEATGENE gives 12 bars, the AyiDrmjj gives 10 bars, the Colliford and the Pursonic give 6 bars each, and the XBVV gives 4 bars. The HEATGENE layout measures 24 by 40 inches, and the Colliford measures 26 inches. Compare bar count with the towels you dry each day, and check the rack size against your wall space.

Controls and timers

A timer sets how long a rack heats, and a temperature control sets how warm it runs. The Colliford uses a touchscreen with temperature from 115 to 155 degrees and heating times from 1 to 9 hours. The AyiDrmjj uses an LED panel with temperature adjustment and a timer, and the XBVV has a built-in timer with temperature control. The Pursonic plugs in and runs continuously once switched on.

Installation choices

Installation decides where a rack can go and whether wiring work is needed. The Colliford and the HEATGENE install hardwired or plug-in, while the Pursonic installs plug-in with wall-mounted or freestanding setup. The AyiDrmjj mounts on the wall with a no-punching option, and the XBVV installs plug-in with all hardware and tools included. Check your outlet position and wall type before choosing.

FAQ

How many bars does each towel warmer have?

The HEATGENE has 12 bars, the AyiDrmjj has 10 bars, the Colliford and the Pursonic have 6 bars each, and the XBVV has 4 bars.

Which towel warmers have a timer?

The Colliford has a timer, the AyiDrmjj has an LED timer, and the XBVV has a built-in timer.

Which towel warmers install hardwired or plug-in?

The Colliford, the HEATGENE and the XBVV install hardwired or plug-in, while the Pursonic installs plug-in.

What temperature figures do these warmers list?

The Colliford sets temperature from 115 to 155 degrees, the Pursonic reaches 122 degrees within about 30 minutes, and the XBVV heats to 113 or 120 degrees in 15 minutes.