Amazon Black Friday Week deals

Paid link

How-to · Air Purifiers

How to Clean a Carbon Air Filter

Short answer

To clean a carbon air filter, unplug the purifier, open the filter door and lift out the pre-filter and the carbon filter. Tap the carbon filter gently over a trash can to shake off loose dust, then brush it with a soft brush. Check the manual before you use water: it says whether the carbon filter can be rinsed or must be replaced.

  1. Unplug the purifier and open it

    Switch the purifier off and pull the plug from the wall before you touch the filters. Open the purifier as the manual shows to reach the filters, and set the cover aside. Note the order the filters sit in so each one goes back in the same place.

  2. Take out the pre-filter first

    Lift out the pre-filter and set it aside, then slide out the carbon filter behind it. Hold the carbon filter flat so trapped dust stays on it and does not fall into the purifier. Check both filters for dust, hair and a grey surface, and look at the manual for the order they go back in.

  3. Tap and brush off the dust

    Hold the carbon filter over a trash can and tap its frame gently so loose dust falls off. Brush the surface with a soft brush, working from one edge to the other so dust does not get pushed deeper into the filter. Do the same for the pre-filter, and wipe inside the purifier with a dry cloth.

  4. Rinse only if the manual allows it

    Some carbon filters can be rinsed and some cannot, so read the manual before water touches the filter. If rinsing is allowed, use plain water only, with no soap and no cleaner mixed in. Let the filter dry fully in open air before it goes back in, since a damp filter can hold dust and odors.

  5. Put the filters back in order

    Slide the carbon filter back into its slot first, then fit the pre-filter in front of it, matching the order you noted at the start. Close the cover and check it sits flush, then plug the purifier back in and switch it on. If the purifier has a filter light or app alert, reset it as the manual says.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Carbon Air Purifier, which compares them spec by spec.

FAQ

Can I wash a carbon air filter with water?

Only if the maker's manual says the filter is washable. If it is, let it dry fully before you put it back. If it is not, tap off the dust and replace it when the manual says to.

How do I know the carbon filter needs replacing?

Look for a grey filter, odors that stay after cleaning, or a filter light or app alert. Follow the schedule in the maker's manual.

Should I clean the pre-filter at the same time?

Yes. Take out the pre-filter, tap off the dust, and wash it only if the manual says it is washable. A clean pre-filter keeps dust off the carbon filter behind it.

More air purifiers how-tos