Amazon Black Friday Week deals

Paid link

How-to · Air Purifiers

How to Remove a HEPA Filter

Short answer

To remove a HEPA filter, switch the purifier off, unplug it, open the filter cover and lift the filter out. Check the filter indicator first, since it tells you when the filter needs replacing. Fit the new filter the same way it came out, and remove any plastic packaging from the new filter before you run the purifier.

  1. Switch the purifier off and unplug it

    Switch the purifier off before you touch the filter. Unplug it from the outlet so the fan cannot start while your hands are inside the unit. Let the purifier sit until the fan stops, then move it to a clear surface where you can work on it. Keep the manual nearby so you can check the steps for your model.

  2. Open the cover and lift the filter out

    Find the filter cover on your purifier and open it as the manual shows. The filter sits behind the cover, and a washable pre-filter sits in front of it on models that have one. Lift the HEPA filter out with both hands and set it on a surface you can wipe clean. If the filter looks grey or the indicator light is on, it is time for a new one.

  3. Clean the pre-filter and check the indicator

    A washable pre-filter can be rinsed with water if the manual allows it, and it should dry fully before it goes back in. The Coway and MOOKA purifiers have washable pre-filters, and the Coway filter indicator tells you when the filters need replacing. The Levoit and MOOKA purifiers also have a filter indicator or reminder. Reset the indicator as the manual shows after you fit a new filter.

  4. Fit the new filter and run the purifier

    Remove the plastic packaging from the new filter before it goes in, since a filter still in its bag cannot work. Slide the new filter into the same slot the old one came from, close the cover and plug the purifier back in. Use the maker's own replacement filter for your model. Levoit notes that its official filters ensure the best fit, while off-brand filters may be unreliable. Run the purifier and check that the indicator has cleared.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best HEPA Air Purifier, which compares them spec by spec.

FAQ

Can I wash a HEPA filter with water?

Only if the maker's manual says the filter is washable. The Coway and MOOKA purifiers have washable pre-filters, which you can rinse with water if the manual allows it. A HEPA filter that is not washable should be tapped clean and replaced when it stays dirty.

How do I know the filter needs replacing?

Watch for a filter that looks grey and for the filter indicator light on your purifier. The Levoit, Coway and MOOKA purifiers have a filter indicator or reminder that lights up when the filter needs attention. Follow the schedule in the maker's manual for your model.

Do I need to remove the plastic from a new filter?

Yes. Remove the plastic packaging from a new filter before you run the purifier, since the filter cannot work while it is still in its bag. The MOOKA and FULMINARE purifiers both need this step for a new filter.

More air purifiers how-tos