Amazon Black Friday Week deals

Paid link

How-to · Ceiling Fans

How to Clean a Ceiling Fan

Short answer

To clean a ceiling fan, switch it off, let the blades stop, then wipe each blade with a dry cloth and follow with a damp cloth for stuck dust. Use water, or water and mild dish soap if the manual allows it, and dry each blade before you switch the fan on. All 4 fans have a light and a remote, so wipe the light cover and the remote too.

  1. Switch the fan off

    Switch the fan off with the remote or the wall switch, and wait until the blades stop moving. Lay an old sheet or a towel on the floor under the fan to catch dust. Check that the blades are still before you reach up to them.

  2. Dust the blades

    Wipe the top and the underside of each blade with a dry cloth, starting at the center and working out to the tip. A pillowcase pulled over a blade collects the dust instead of dropping it on the floor. The ZOUQILAI fan has 3 blades, and the ZMISHIBO, Depuley and Crazypai fans have 5 blades each, so count the blades as you go.

  3. Wipe stuck dust with a damp cloth

    Dampen a soft cloth with water and wring it out, then wipe each blade again to lift dust the dry cloth left behind. For marks that stay, add a drop of mild dish soap to the water if the manual allows it, and wipe again with a clean damp cloth. Dry each blade with a dry cloth so no water sits on the blades.

  4. Clean the light cover and the remote

    Wipe the light cover with a dry cloth, then with a damp cloth if it needs more. All 4 fans have a built-in light, so follow the manual if the cover comes off for cleaning. Wipe the remote with a dry cloth and keep water off its buttons.

  5. Check the fan before you switch it on

    Look over the blades and the light cover to see that each part sits right and nothing is loose. Switch the fan on with the remote or the wall switch and let it run on a low speed. If a blade looks out of place, switch the fan off and check the manual.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Ceiling Fans, which compares them spec by spec.

FAQ

Can I clean the blades while the fan runs?

No. Switch the fan off and wait until the blades stop before you wipe them. A moving blade can throw dust and water, and a still blade is easier to wipe on both sides.

What should I use to wipe the blades?

A dry cloth for loose dust, then a damp cloth with water for dust that stays. Add a drop of mild dish soap to the water if the manual allows it, and dry each blade after you wipe it.

How do I clean the light on a ceiling fan?

Wipe the light cover with a dry cloth, then with a damp cloth if it needs more. Follow the manual if the cover comes off for cleaning, and keep water off the remote buttons.

Do I need to take the blades off to clean them?

No. Wipe each blade in place from the center out to the tip, on the top and the underside. Take a blade off only if the manual says it comes off, and follow the manual to put it back.

More ceiling fans how-tos