Amazon Black Friday Week deals

Paid link

How-to · Clothes Irons

How to Descale an Iron

Short answer

To descale an iron, fill the tank with a mix of white vinegar and water if the manual allows it, heat the iron, and run steam through it over a sink until the tank is empty. Then rinse the tank with plain water and steam that through too. Check the manual before you start, since some irons call for the maker's own descaler instead of vinegar.

  1. Unplug the iron and empty the tank

    Unplug the iron and let it cool before you start. Pour out any water left in the tank, and turn the steam off. Work over a sink or a towel, since the tank and soleplate will drip as you handle them.

  2. Mix vinegar and water if the manual allows it

    Check the manual before you mix anything. If it allows vinegar, fill the tank with a mix of white vinegar and water. If the manual calls for the maker's own descaler, use that instead and follow the directions on the packet. Never mix cleaners, and never use bleach.

  3. Heat the iron and run steam through it

    Plug the iron in and set it to steam. Hold it over the sink with the soleplate facing down, then press the steam burst button in short presses until the tank runs empty. The steam carries loosened scale out through the vents. Keep your hand clear of the soleplate and the steam.

  4. Rinse the tank with plain water

    Refill the tank with plain water and run steam through the iron over the sink again. This flushes out the vinegar and any scale left behind. Repeat the rinse if the steam still smells of vinegar. Empty the tank when you finish.

  5. Wipe the soleplate and store the iron

    Unplug the iron and let it cool. Wipe the soleplate and outer surfaces with a soft cloth dampened with water. Leave the tank empty and store the iron on its heel, with the cord loose, so the next use starts clean.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Clothes Iron, which compares them spec by spec.

FAQ

Can I use white vinegar to descale any iron?

Only if the maker's manual allows it. Some irons call for the maker's own descaler, so check the manual before you put vinegar in the tank.

How do I know my iron needs descaling?

Look for white flakes on clothes, weak steam, or water spitting from the soleplate. Those signs point to scale in the tank or steam vents, so descale and check the manual.

Can I descale an iron with tap water?

Plain water alone will not clear scale. Use a vinegar mix or the maker's own descaler, if the manual allows it, then rinse with plain water.

What should I do if the iron still steams weakly after descaling?

Repeat the descale if the manual allows it, and wipe the soleplate with a soft cloth dampened with water. If steam stays weak, contact the maker or a repair service.

More clothes irons how-tos