How-to · Coffee Makers
How to Descale a Coffee Maker
To descale a coffee maker, empty the carafe and filter basket, run white vinegar or the maker's own descaler through a brew cycle if the manual allows it, then run water through until the rinse water runs clear. Unplug the maker before you clean it, and follow the schedule in the maker's manual. The Cuisinart and the Ninja each add a clean cycle at the press of a button.
Check the manual first
Start with the maker's manual for your model. It names the descaler to use and the steps to follow, and it says whether white vinegar is allowed in your maker. Use only water, mild dish soap, white vinegar or the maker's own cleaner or descaler, and only if the manual allows it. Never mix cleaners. Unplug the coffee maker before you clean it, and keep the manual nearby while you work.
Empty the carafe and the basket
Pour out any coffee left in the carafe and rinse it with water. Lift out the filter basket and throw away the used grounds and any paper filter. The Hamilton Beach, the Cuisinart and the Ninja each have a permanent filter, so rinse that filter and put it back. The BLACK+DECKER brew basket takes a standard paper coffee filter, so fit a fresh filter only if the manual calls for it during descaling.
Run the descaling solution through
Fill the water reservoir with the descaling solution the manual allows, white vinegar or the maker's own descaler. Place the empty carafe under the basket and start a brew cycle. The Cuisinart runs a self-clean cycle at the press of a button, and the Ninja has a CLEAN setting that descales at the touch of a button. Let the cycle finish, then pour the solution out of the carafe.
Rinse with fresh water
Fill the reservoir with fresh water and run a full brew cycle with the empty carafe in place. Pour the water out and repeat with fresh water until the rinse water runs clear and the vinegar smell is gone. The Ninja has a removable water reservoir that you can carry to the sink for filling, and the Hamilton Beach has a separate water reservoir for each brewer. Wipe the outside with a damp cloth and mild dish soap if the manual allows it.
Watch for the descale signal
Descale again when the maker asks for it or when brewing slows and the coffee tastes off. The Cuisinart has a decalcify indicator that signals when cleaning is due, so watch for that light. For the other makers, follow the schedule in the maker's manual rather than a fixed calendar. When the signal shows, run the clean cycle the manual describes.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Hamilton Beach 2-Way Programmable Coffee Maker
A 12-cup coffee maker with a single-serve side, 2 water reservoirs and a permanent filter, with a 1-year warranty.
View on Amazon -
Cuisinart PerfecTemp 14-Cup Programmable Drip Coffee Maker
A 14-cup coffee maker with a self-clean cycle, a decalcify indicator and a 3-year warranty.
View on Amazon -
BLACK+DECKER 12-Cup Drip Coffee Maker with Vortex
A 12-cup coffee maker with a 2-hour auto shutoff, Sneak-A-Cup and a paper filter basket.
View on Amazon -
Ninja Fresh Brew Coffee Maker
A 12-cup coffee maker with a CLEAN setting, a removable water reservoir and a 1-year warranty.
View on Amazon
These come from our ranked list Best Coffee Machine, which compares them spec by spec.
FAQ
Can I use vinegar to descale a coffee maker?
Only if the maker's manual allows it. Use white vinegar or the maker's own descaler, run a brew cycle, then rinse with fresh water until the rinse water runs clear. Never mix cleaners.
How often should I descale my coffee maker?
Follow the schedule in the maker's manual. The Cuisinart has a decalcify indicator that signals when cleaning is due, so watch for that light and run the self-clean cycle when it shows.
Do I need to remove the filter before descaling?
Empty the filter basket and throw away used grounds and any paper filter first. The Hamilton Beach, the Cuisinart and the Ninja each have a permanent filter, so rinse it and put it back before you run the cycle.





