How-to · Electric Blankets
How to Care for an Electric Blanket
To wash an electric blanket, unplug it and detach the controller, then wash it on a gentle cycle and let it dry fully before you plug it back in. Never wash a blanket with the controller attached, and never plug it in while it is still damp. Check the care instructions first, since the steps below follow what the four blankets here allow.
Unplug and detach the controller
Unplug the blanket from the wall outlet and detach the controller from the blanket before it goes near water. The Qieryun, Cushious and PFASDFW blankets all say to detach the controller before washing, and the Bedsure blanket comes with 1 controller. Never put the controller or the plug in water. Set the controller aside where it stays dry while the blanket washes.
Check the blanket before washing
Look over the blanket for loose threads, worn spots or a wire that has shifted out of place. If the blanket or controller looks damaged, contact the maker or a repair service instead of washing it. Shake the blanket out over a trash can to drop loose lint and crumbs. A quick check keeps a small fault from getting worse in the wash.
Wash on a gentle cycle
Put the blanket in the washer on its own and run a gentle cycle. All four blankets here are machine washable, and the Qieryun blanket says to use a gentle cycle. Keep the blanket loose in the drum so the wires inside are not twisted or bunched. Do not add other heavy items to the same load, since they can press on the wires.
Dry it fully before use
Air-dry the blanket or tumble dry it on low heat, as the Qieryun and PFASDFW blankets allow. The Qieryun blanket also says not to use it while it is tumble drying or drying in the sun. Let the blanket dry fully, then check that the fabric and the wires feel dry before you reconnect the controller and plug it in. A damp blanket should never be plugged in.
Store it flat and loose
Fold the blanket loosely for storage and keep it where nothing heavy sits on top of it. Tight folds and heavy stacks can bend the wires inside over time. Keep the controller with the blanket so the pair stays together, and unplug the blanket when it is not in use. When the cold season returns, check the blanket and controller before you plug it in again.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Qieryun Heated Blanket Electric Throw
Its 10 heat settings and 8-hour auto-off come with overheat protection, and the blanket is machine washable with a detachable controller.
View on Amazon -
Bedsure GentleSoft Heated Blanket Throw
Its 6 heat levels and 6 timer settings run from 1 to 10 hours, with an 8-hour auto shut-off and a machine washable 50 by 60 inch throw.
View on Amazon -
Cushious Electric Heated Blanket Throw Size 50"x60"
Its 10 heat settings and 1 to 8 hour auto shut-off timer come with overheat protection, and the blanket is machine washable.
View on Amazon -
PFASDFW Heated Blanket Electric Throw 50''x60''
Its 10 heat settings and 1 to 8 hour timers come with an 8-hour auto-off, and the blanket is machine washable with a detachable controller.
View on Amazon
These come from our ranked list Best Heated Blanket, which compares them spec by spec.
FAQ
Can I wash an electric blanket in a washing machine?
Yes, if the maker says it is machine washable. All four blankets here are machine washable, so detach the controller first and run a gentle cycle. Always check the care instructions on your own blanket before you wash it.
Can I tumble dry an electric blanket?
Yes, on low heat, if the maker allows it. The Qieryun and PFASDFW blankets allow tumble drying on low heat, and both also allow air drying. Never use the blanket while it is drying, and make sure it is fully dry before you plug it in.
What do I do if my electric blanket stops heating?
Check that the controller is firmly connected and the plug is fully in the outlet. If the blanket still does not heat, unplug it and contact the maker or a repair service. Do not open the controller or the blanket to fix parts inside.





