Amazon Black Friday Week deals

Paid link

How-to · Food Processors

How to Work a Food Processor

Short answer

To work a food processor, lock the bowl and blade on the base, add food through the feed chute, and press the controls for the job you want. The lid locks the bowl in place on the BLACK+DECKER, and the Ninja runs only when the parts are locked in place. Use short presses, check the texture, and unplug the machine before you take it apart to clean it.

  1. Assemble the bowl and blade

    Set the base on a flat counter and plug it into a 120V outlet. Set the work bowl on the base and fit the blade or disc inside it, then set the lid on top and lock it. The BLACK+DECKER uses the lid as the locking mechanism. The Hamilton Beach stacks together with no twist-locking: set the lid on the bowl and press it to chop. The Ninja runs only when the parts are locked in place, so check the lid before you press a control.

  2. Add food through the feed chute

    Cut food into pieces that fit the feed chute, then drop them in while the machine runs or before you start it. Use the pusher to guide food down toward the blade, and keep your fingers out of the chute. Add food in small batches so the bowl does not fill past the blade, and stop to check the texture before you add more. The Ninja 9-cup bowl takes large batches, and the Hamilton Beach 3-cup bowl suits everyday use.

  3. Pick a speed or preset

    The Ninja has 3 speeds and 4 Auto-iQ presets for chopping, slicing, pureeing and mixing dough, so pick the preset that matches the job. The BLACK+DECKER and the Ganiza each have 2 speeds, so start on the lower speed and move up if the food needs it. The Hamilton Beach works by pressing the lid: press to chop and release to stop. Use short presses and check the texture between presses, so the food does not turn to paste before you notice.

  4. Fit the blade for the job

    Fit the blade or disc that matches the job before you add food. The Ninja comes with a chopping blade, a dough blade and a reversible slicing and shredding disc, so use the dough blade for dough and the disc for slicing or shredding. The BLACK+DECKER has a stainless steel S-blade and a reversible shred and slice disc. The Ganiza comes with 2 sets of blades and 2 bowls in glass and stainless steel, so use one bowl for meat and the other for vegetables.

  5. Unplug it and clean the parts

    Unplug the machine before you take it apart. Lift the blade out with care, then wash the bowl, lid and blades in the dishwasher or by hand with water and mild dish soap, if the manual allows it. Wipe the base with a damp cloth and let the parts dry before you put them away. If the Ganiza stops while you work, wait a few minutes for it to cool down before you start it again, as the maker directs.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Food Processor, which compares them spec by spec.

FAQ

Can I put the parts in the dishwasher?

The removable parts go in the dishwasher on the Ninja, Hamilton Beach and BLACK+DECKER. For the Ganiza, follow the manual for cleaning the bowls and blades, and wipe the base with a damp cloth.

What do I do if the food processor stops?

Check that the bowl and lid are locked in place, since the Ninja runs only when the parts are locked in place. If the Ganiza stops, wait a few minutes for it to cool down before you start it again. If it still does not run, read the manual or contact the maker.

How do I keep the texture even?

Cut the food into even pieces before you add it, and use short presses instead of running the motor without a break. Check the bowl between presses, and stop when the pieces look the size you want.

Which bowl size do I need?

Look at the bowl capacity each maker lists: the Ninja has a 9-cup bowl, the BLACK+DECKER an 8-cup bowl, the Ganiza 8-cup bowls and the Hamilton Beach a 3-cup bowl. Pick the size that fits the amount you cook in a batch.

More food processors how-tos