Amazon Black Friday Week deals

Paid link

How-to · Furnace Filters

How to Put In a Furnace Filter

Short answer

Slide the new filter into the filter slot with the airflow arrow pointing toward the furnace blower, then close the cover or grille. Match the nominal size printed on the old filter frame, 16x25x1 for the filters here, and check the manual for the schedule for your system. The steps below take you from the old filter to the new one.

  1. Find the filter slot

    The filter sits in a slot in the furnace cabinet or in a return grille on a wall or ceiling. Look for a cover or a grille with a latch or screws, and open it to reach the filter. The old filter slides out of the slot, so note which way its arrow points before you pull it out. If the slot is inside the furnace, switch the furnace off at the thermostat first.

  2. Match the size and MERV rating

    Read the size printed on the old filter frame and buy the same nominal size, such as 16x25x1. The actual size runs slightly smaller than the nominal size, so it slides into the slot: three of the filters here measure 15.75 by 24.75 by 0.75 inches, while the Filtrete measures 15.68 by 24.68 by 0.81 inches. The MERV rating on the frame tells you the rating of the filter you are replacing, so match it or pick the rating your manual calls for.

  3. Point the arrow toward the blower

    Look for the arrow printed on the filter frame; it shows the direction of airflow. Hold the new filter so the arrow points toward the furnace blower and away from the return grille. If the slot is in the furnace cabinet, the arrow points into the furnace. A filter put in backward still fits the slot, so check the arrow before you slide it in.

  4. Slide the filter in and close up

    Slide the new filter into the slot until it sits flat and the frame meets the slot edges. Do not fold or bend the filter to force it in; if it will not slide in, check the size on the frame against the old filter. Close the cover or the return grille and latch it, then switch the furnace back on at the thermostat.

  5. Know when to change it again

    A filter that looks grey and loaded with dust is a sign to check the schedule in the maker's manual. Simply and Aerostar filters give up to 3 months of filtration, and Filtrete says to change its filter at least once every 90 days, so the schedule comes from the maker, not the calendar. Write the change date on the filter frame so the next change is easy to plan.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best 16x25x1 Hvac Filter, which compares them spec by spec.

FAQ

Which way does the arrow on a furnace filter point?

Toward the furnace blower and away from the return grille. Hold the filter with the arrow pointing into the furnace before you slide it in, and check the arrow again once it sits in the slot.

How do I know the filter size for my furnace?

Read the size printed on the old filter frame and buy the same nominal size. The filters here are nominal 16x25x1, so measure the old filter if the frame print is hard to read.

How often should I change a furnace filter?

Follow the schedule in the maker's manual, and check the filter when it looks grey and loaded with dust. Simply and Aerostar filters give up to 3 months of filtration, Filtrete says to change its filter at least once every 90 days, and Amazon Basics gives replacements for up to 12 months with changes every 60 to 90 days.

More furnace filters how-tos