Amazon Black Friday Week deals

Paid link

How-to · Humidifiers

What Is an Evaporative Humidifier?

Short answer

An evaporative humidifier adds moisture to dry indoor air by passing air through a wet wick filter. A fan pulls room air across the wick, water evaporates from the wick into the air, and the air leaves with no visible mist. The tank feeds the wick, and a humidistat or a fan speed setting controls how much moisture the unit puts out.

  1. How an evaporative humidifier works

    A wick filter sits with its lower end in the water tank, and the wick draws water up through its fibers. A fan pulls dry room air through the wet wick, and the water on the wick turns into vapor and joins the air. The air that leaves the unit carries moisture but shows no visible mist, which is why this type is called mist-free. Fan speed sets how much air moves through the wick, and a humidistat switches the fan off when the air reaches the level you set.

  2. What the wick filter does

    The wick is the part that holds the water the air picks up. As water evaporates from it, the wick slowly stiffens or turns grey, and a wick that looks grey or gives off a smell is a sign to change it. Follow the schedule in the maker's manual, and use the maker's own replacement filter for the model you own. The Vornado Evap40 uses 2 wick filters, and the BLUEAIR H38i has a washable wick filter.

  3. How to read the coverage figure

    Each maker rates its humidifier for a room size in square feet, and that figure is the maker's own measure, not a rule for every room. Compare the maker's figure with the size of the room where the unit will run. The Vornado Evap40 is rated for up to 1,000 sq ft by the maker, the BLUEAIR H38i for up to 596 sq ft, and the Pure Enrichment MistAire EVA-Speed for up to 500 sq ft. A larger room needs a unit with a larger rated figure.

  4. Filling the tank and setting it running

    Fill the tank with water, set the tank back in place, and choose a fan speed or a humidity level on the controls. Top-fill models take water poured straight into the top, so the tank stays in the unit while you fill it. The BLUEAIR H38i runs up to 48 hours on one fill, and the Vornado Evap40 holds 4 gallons across its dual tanks. Refill the tank when it runs low.

  5. Keeping the humidifier clean

    Unplug the unit before you clean it, and empty the tank when the unit will sit unused. Wipe the tank and the base with water and mild dish soap, or with white vinegar, if the manual allows it, and let the parts dry before you put them back. A tank that smells is a sign to clean it and to change the water. Follow the cleaning steps in the maker's manual for the model you own.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Evaporative Cool Mist Humidifier, which compares them spec by spec.

FAQ

How is an evaporative humidifier different from a mist humidifier?

An evaporative humidifier passes air through a wet wick, so the moisture leaves as vapor with no visible mist. A mist humidifier puts out a visible spray of fine water droplets.

Do I need to change the wick filter?

Yes, when the wick looks grey, stiffens, or gives off a smell. Follow the change schedule in the maker's manual and use the maker's own replacement filter for your model.

What size evaporative humidifier do I need?

Compare the maker's rated square feet with the size of your room. The Vornado Evap40 is rated for up to 1,000 sq ft by the maker, the BLUEAIR H38i for up to 596 sq ft, and the Pure Enrichment MistAire EVA-Speed for up to 500 sq ft.

More humidifiers how-tos