How-to · Immersion Blenders
How to Clean an Immersion Blender
To clean an immersion blender, unplug it, detach the blending shaft from the motor body, and rinse the blade end under running water. Wash the detachable parts with warm water and mild dish soap if the manual allows it, wipe the motor body with a damp cloth, and dry each part before you store it.
Unplug and take it apart
Unplug the blender before you touch the blade end. Twist or pull the blending shaft off the motor body, following the release the maker built in. Take off the whisk, frother or other attachments the same way, so each part can be washed on its own. Set the motor body aside on the counter, plug end up.
Rinse the blade end right away
Hold the shaft by the top, away from the blade, and rinse the blade end under running water. Turn the shaft so the water reaches inside the guard and around the blade. Rinse right after blending, while food is still soft, so it comes off with the water instead of drying in place.
Wash the detachable parts
Wash the shaft, guard and attachments with warm water and mild dish soap if the manual allows it. Use a cloth or a soft sponge on the blade area, and rinse each part under running water until the soap is gone.
Wipe the motor body
Wipe the motor body with a damp cloth, then dry it with a dry cloth. Do not run water over the motor body, and do not put it under the tap. If food splashed on the controls, wipe them with the damp cloth and dry them the same way.
Dry and store the parts
Let each part dry fully before you put the blender away, so water does not sit in the guard or around the blade. Dry the shaft with the blade end down, so water drains out of the guard. Store the blender with its parts together, where the blade end cannot catch on other items in the drawer.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Turelar Immersion Blender Handheld Corded
Its attachments detach with a single click for cleaning, and its food-grade nylon blade guard helps keep splashes down while you blend.
View on Amazon -
KitchenAid Variable Speed Corded Hand Blender
Its removable blending arm goes in the dishwasher, and the 3-cup blending jar with a lid gives you a container to rinse or store.
View on Amazon -
Cuisinart Smart Stick 2-Speed Hand Blender
Its shaft detaches for handwashing, and the 3-cup mixing cup goes on the top rack of the dishwasher, so both parts wash apart from the motor body.
View on Amazon -
VEVOR Commercial Immersion Blender 750W 20" Heavy
Its blending foot detaches from the handle, the blade goes in the dishwasher, and a blade remover and replacement blade head come in the box.
View on Amazon
These come from our ranked list Best Immersion Blender, which compares them spec by spec.
FAQ
Can I put my immersion blender in the dishwasher?
Only the parts the maker lists for the dishwasher, and only as the manual describes. The motor body never goes in the dishwasher.
How do I clean the blade guard?
Lift food off the guard with a cloth, then rinse it under running water. On models where the guard detaches, take it off and wash it with warm water and mild dish soap if the manual allows it.
Why does food stick under the blade guard?
Food collects where the blade meets the guard, and it dries there if the blender sits after use. Rinse the blade end right after blending, before the food dries.




