Amazon Black Friday Week deals

Paid link

How-to · Infrared Heaters

How to Size an Infrared Heater

Short answer

To size an infrared heater, read the maker's rated square feet for each heater and match it to the room you want to heat. The Dr Infrared Heater is rated for 576 sq ft, the RealSmart for up to 350 sq ft, the WEWARM for 300 sq ft, and the Heat Storm Phoenix for 150 sq ft. Then check the wattage and thermostat range before you pick one.

  1. Read the maker's rated square feet

    Start with the square feet the maker rates each heater for, since that is the figure the heater is sized by. The Dr Infrared Heater is rated for 576 sq ft, the RealSmart for up to 350 sq ft, the WEWARM for 300 sq ft, and the Heat Storm Phoenix for 150 sq ft. Measure the room you want to heat, then pick a heater whose rated coverage fits it. If the room is larger than the rated figure, the heater is the wrong size for it.

  2. Check the wattage and heat settings

    All four heaters here are 1500 W, so wattage does not separate them. What differs is the heat settings: the RealSmart and the WEWARM have 3 settings, with 1000W, 1500W and ECO mode, while the Heat Storm Phoenix has 2 settings, 750 watts and 1500 watts. The Dr Infrared Heater has high and low settings. Pick the settings you will use, and check that the thermostat range fits the temperature you want.

  3. Use the thermostat and timer

    All four heaters here have an adjustable thermostat, and the Dr Infrared Heater, RealSmart and WEWARM have a 12-hour timer with a remote control. The Dr Infrared Heater thermostat runs from 50 to 85 degrees, the RealSmart and the WEWARM from 50 to 90 degrees, and the Heat Storm Phoenix shows the ambient temperature on an LED display. Set the thermostat to the temperature you want, set the timer for the hours you need, and let the heater hold the room there.

  4. Place the heater and plug it in

    All four heaters here plug into a 120 volt outlet and draw 12.5 amps, so check the outlet and the circuit before you plug one in. Unplug the heater before you clean it, and read the maker's manual for placement and care.

  5. Read the BTU and watt figures

    Two heaters here list a BTU figure: the Dr Infrared Heater and the Heat Storm Phoenix both list 5200 BTU. All four list 1500 watts, so the watt figure does not separate them. Use the maker's rated square feet to size the heater, and read the BTU figure as the maker's own heat output, not as a sizing chart.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Infrared Space Heater, which compares them spec by spec.

FAQ

What size infrared heater do I need for my room?

Match the maker's rated square feet to the room. The Dr Infrared Heater is rated for 576 sq ft, the RealSmart for up to 350 sq ft, the WEWARM for 300 sq ft, and the Heat Storm Phoenix for 150 sq ft. Pick the heater whose rated coverage fits the room.

Do all four heaters use the same outlet?

Yes. All four plug into a 120 volt outlet and draw 12.5 amps. Check the outlet and the circuit before you plug one in, and follow the maker's manual for placement.

Which heater has a timer and a remote?

The Dr Infrared Heater, the RealSmart and the WEWARM have a 12-hour timer and a remote control. The Heat Storm Phoenix has a remote control and a thermostat with an LED display.

What does the ECO mode do?

ECO mode works with the built-in thermostat to hold the temperature the heater is set to. The RealSmart holds 68 degrees in ECO mode, and the WEWARM adjusts the heat to hold the temperature you set.

More infrared heaters how-tos