How-to · Milk Frothers
How to Make Latte Art With a Milk Frother
To make latte art with a milk frother, froth cold whole milk into dense warm foam, pour it slowly into the espresso, and move the jug to draw the pattern. The frother does the foam; the pour does the art. Pick the dense foam setting, not the airy one, and pour the foam slowly.
Start with cold whole milk
Pour cold whole milk into the frother, up to the foam amount the maker gives. The Casimhu maker says milk with at least 3% fat is necessary for better results, and to chill the milk to 41°F to 50°F before frothing for thick and creamier foam. The LIFEGETTER maker also says milk over 3% fat gives rich and stable foam.
Pick the dense foam setting
Latte art needs dense warm foam that pours like thick cream, not airy foam full of large bubbles. All four frothers here make a dense warm foam setting: the SIMPLETASTE and Instant Pot make warm dense foam, the Casimhu makes thick warm foam, and the LIFEGETTER makes dense hot foam and has a latte art mode. Airy foam suits a cappuccino, and cold foam suits iced drinks, so save those settings for those drinks.
Pour low and slow for the pattern
Tilt the cup and pour the foam from a little height first, so it sinks under the espresso and mixes in. Then lower the jug close to the surface and pour in a slow, steady stream, moving the jug side to side to draw the pattern. The Instant Pot frother has a spout for precise pouring, and the Casimhu frother has a wide mouth that makes pouring easier. Stop pouring before the cup overflows, and lift the jug straight up to finish the pattern.
Clean the frother after each use
Rinse the inside with running water and wipe it dry with a soft cloth after each use, and keep water away from the bottom and exterior, as the SIMPLETASTE maker says. The Instant Pot frother has parts that go in the dishwasher, so check the manual for which parts those are.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
SIMPLETASTE Milk Frother
A 4-in-1 frother with warm dense foam, warm airy foam and cold foam, auto shut-off and a non-stick interior.
View on Amazon -
Instant Pot 4-in-1 Milk Frother & Steamer
A 4-in-1 frother with cold foam, light and dense warm foam, a pouring spout and parts that go in the dishwasher.
View on Amazon -
Casimhu 4-in-1 Electric Milk Frother and Steamer
A 4-in-1 frother with thick warm foam, cold foam, an LED touch screen and a ceramic-coated interior.
View on Amazon -
LIFEGETTER Milk Frother and Steamer 6-in-1 Electric Automatic
A 6-in-1 frother with a latte art mode, 3 hot foam settings, cold foam, temp control and an LED display.
View on Amazon
These come from our ranked list Best Milk Steamer for Latte, which compares them spec by spec.
FAQ
Which foam setting makes latte art?
Use the dense warm foam setting. Airy foam sits on top in stiff bubbles and will not pour into a pattern, while cold foam suits iced drinks. The LIFEGETTER frother has a latte art mode for this pour.
What milk gives the thickest foam for latte art?
Use whole milk with at least 3% fat. The Casimhu maker says that fat level is necessary for better results and to chill the milk to 41°F to 50°F before frothing, and the LIFEGETTER maker says milk over 3% fat gives rich and stable foam.
Can I use cold foam for latte art?
No. Cold foam is made for iced drinks, and it will not blend into hot espresso the way warm dense foam does. Use the dense warm foam setting and pour while the foam is fresh.





