How-to · Patio Heaters
How to Light a Patio Heater
To light a patio heater, open the propane tank valve, turn the control knob to the pilot or ignite mark, and press the ignition button until the burner catches. Hold the knob as the maker's manual says, then turn it up to the heat level you want. If the burner does not catch, turn everything off and wait before you try again.
Check the heater before you light it
Set the heater on flat, open ground with room around it. Look over the burner and the base for damage, and check that the propane tank sits in its holder. Follow the maker's manual for the tank connection and for any checks it lists before lighting.
Open the valve and turn the knob
Open the valve on the propane tank, then turn the heater control knob to the pilot or ignite mark. Press the ignition button and watch for the flame at the burner. If nothing lights, turn the knob back to off, close the tank valve, and wait before you try the steps again.
Hold the knob and set the heat
When the flame catches, hold the control knob in place as the maker's manual says so the burner stays lit. Let go of the knob, then turn it slowly toward the heat level you want. If the flame goes out, turn the knob to off, close the tank valve, and start the lighting steps over.
Turn the heater off after use
Turn the control knob to off and close the valve on the propane tank when you are done. Let the heater cool before you move it or put its cover on. Store the tank as the maker's manual says, and keep the heater upright on its wheels.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Amazon Basics 46,000 BTU Portable Outdoor Propane
Its one-touch ignition button starts the burner, and its adjustable temperature knob controls the 46,000 BTU heat output.
View on Amazon -
Hykolity 50,000 BTU Patio Heater with Sand
Its one-press ignition system starts the burner, and its control valve adjusts the 50,000 BTU heat output.
View on Amazon -
PATIOPIA Flame Pyramid Pool Heater
Its pulse ignition system lights the burner, and its built-in control valve adjusts the 48,000 BTU heat output.
View on Amazon -
Pamapic 89" Pyramid Patio Heater Outdoor
Its pulse ignition starts the burner, and it runs on a standard 20 lb propane tank.
View on Amazon
These come from our ranked list Best Outdoor Heater, which compares them spec by spec.
FAQ
Why does my patio heater not light?
Check that the tank valve is open and the control knob is on the pilot or ignite mark, then press the ignition button again. If it still does not light, turn everything off and follow the maker's manual before you try again.
Can I light a patio heater with a match?
Follow the maker's manual for the lighting method it lists. Use the ignition control on the heater, as the maker's manual shows, rather than an open flame.
What do I do if the flame goes out?
Turn the control knob to off and close the tank valve, then check that the heater stands on flat ground. Follow the maker's manual before you light it again.




