Amazon Black Friday Week deals

Paid link

How-to · Portable Air Conditioners

How Mini Portable Air Conditioners Work

Short answer

A mini portable air conditioner cools one room by pulling warm air in, passing it over a cold coil, and sending the heat outside through a hose fitted to a window. A fan then pushes the cooled air back into the room. The unit also collects moisture from the air, and most of the water evaporates through the exhaust hose.

  1. How the cooling loop works

    Inside the unit, a compressor circulates refrigerant through a loop. The refrigerant absorbs heat as room air passes over the cold indoor coil, then releases that heat at the hot coil. A fan draws warm room air in and pushes cooled air back out, while a second flow of air carries the heat away through the exhaust hose. The loop repeats as long as the unit runs, so the room air passes over the coil again and again.

  2. What the exhaust hose does

    The hose carries hot air from the unit to a window. The window kit that comes with the unit holds the hose end in place and closes the gap around it, so the hot air leaves the room instead of drifting back in. Keep the hose as short and as straight as the kit allows, and check that the window panel fits the window before you switch the unit on. A hose that sags or kinks slows the air leaving the unit.

  3. Where the water goes

    Cooling pulls moisture out of room air, and that water collects inside the unit. In cooling mode, much of it evaporates and leaves through the exhaust hose, so there is no daily emptying. In dehumidifying mode, the unit pulls more water from the air. On the DOMANKI unit, the drain plug on the back connects to a hose for continuous drainage. Empty any collected water as the maker's manual says, and unplug the unit before you clean it.

  4. What the modes do

    Cool mode runs the cooling loop and lowers the room temperature. Fan mode moves room air without cooling it, which suits times when the room feels close but not hot. Dehumidify mode pulls moisture from the air while the fan runs. The SereneLife unit also has a heat mode for warming a room. Use the remote control or the control panel to switch modes, set the fan speed and set the 24-hour timer.

  5. Setting it up and running it

    Roll the unit into place on its casters and fit the window kit and exhaust hose as the maker's manual shows. Plug it into a wall outlet and use the remote control or the control panel to pick a mode and a fan speed. Check the filter as the manual says, and clean it only in the way the manual allows, so air keeps moving through the unit. When the room no longer needs cooling, switch the unit off, unplug it and store the hose and window kit with it.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Portable Air Conditioner, which compares them spec by spec.

FAQ

Does a portable air conditioner need a window?

Yes. The exhaust hose must send hot air outside, and the window kit holds the hose in the window opening. Without a vent to the outside, the hot air stays in the room.

Do I have to empty water from the unit?

In cooling mode, much of the water evaporates through the exhaust hose. In dehumidifying mode, the DOMANKI unit lets you remove the drain plug on the back and connect the included water hose for continuous drainage, and empty any collected water when the manual says to.

Can I move the unit between rooms?

Yes. The casters let you roll it to another room, but the exhaust hose must reach a window there. Refit the window kit in the new room before you switch the unit on.

More portable air conditioners how-tos