Amazon Black Friday Week deals

Paid link

How-to · Security Camera Systems

How to Clean a Security Camera Dome

Short answer

To clean a security camera dome, switch the camera off and disconnect power, then wipe dust from the dome with a dry soft cloth. Wash it with warm water and mild dish soap on a soft cloth if the manual allows it, rinse with clean water, and dry it with a soft towel.

  1. Switch the camera off first

    Switch the camera off and disconnect power before you touch the dome, and follow the instructions in the maker's manual. If the camera is out of reach, do not try to reach it from a ladder on your own; follow the manual and ask the maker or a licensed electrician for help. Work only on a camera you can reach with both feet on the floor.

  2. Brush dust off the dome

    Wipe dust and loose dirt from the dome with a dry soft cloth, using light strokes across the curve. Brush dust from the rim and the base of the camera with a dry soft brush, and pick up cobwebs with the cloth. Do not press hard on the dome, and do not use a rough cloth that can mark the surface.

  3. Wash the dome with soapy water

    If the manual allows it, dampen a soft cloth with warm water and a little mild dish soap, and wipe the dome in slow circles. Rinse the cloth with clean water and wipe the dome again to remove soap. Do not spray water at the camera, and keep water away from the cable and the mount.

  4. Dry the dome and check the picture

    Dry the dome with a soft towel so water does not dry on it and leave marks. Switch the power back on and look at the live picture on the app or monitor. If the picture still looks cloudy, wipe the dome again with a clean, damp cloth and dry it. If marks stay on the dome, contact the maker.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Nvr Poe Camera System, which compares them spec by spec.

FAQ

Can I spray water on a camera dome?

No. Use a soft cloth dampened with warm water and mild dish soap if the manual allows it. Do not spray water at the camera, and keep water away from the cable and the mount.

Can I use glass cleaner on a camera dome?

No. Use only water, mild dish soap, or white vinegar if the manual allows it, or the maker's own cleaner. Never mix cleaners, and never use bleach on the dome.

Why is my camera picture cloudy after cleaning?

Soap or water left on the dome can make the picture look cloudy. Wipe the dome again with a cloth dampened with clean water, dry it with a soft towel, and check the picture again.

More security camera systems how-tos