How-to · Space Heaters
How Does a Space Heater Work?
A space heater turns electricity into heat inside a small room. Current runs through a heating element, such as a ceramic plate, a quartz tube or a PTC ceramic element, and the element warms the air around it or radiates heat outward. A fan or natural air movement then spreads that warmth, and a thermostat switches the element off once the room reaches the set temperature.
Electricity heats the element
A heater plugs into a 120V outlet and draws current through a heating element. The element resists the current and turns that energy into heat. In a ceramic heater the element is a ceramic plate. In an infrared heater it is a quartz tube, and in a PTC ceramic heater it is a PTC ceramic element. The element gets hot as current passes through it, and the rest of the heater moves that heat into the room.
Heat moves into the room
Radiant heaters send heat in straight lines to people and objects in front of them. Convection heaters warm the air, which rises and circulates on its own. Forced-air heaters add a fan that pushes warm air across the room so the warmth spreads through the space. The type of heater decides whether the heat reaches you directly or travels through the air first.
The thermostat controls the cycle
A thermostat measures the air temperature and switches the heating element on and off to hold the level you set. When the room is below the set point the element heats. When the room reaches it the element stops while the fan may keep running. Heat settings let you choose between a lower and a higher output, and a timer switches the heater off after a set period.
Place it and use the controls
Set the heater on a flat floor surface with space around it and plug it directly into a wall outlet. Use the thermostat dial or the remote control to choose a temperature and a heat setting. A timer can switch the heater off after a set period. Some heaters switch off on their own if tipped over or if they overheat. Unplug the heater before you clean it, and follow the maker's manual for care and placement.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Dr Infrared Heater DR-968 Portable Space Heater
Its dual heating system pairs an infrared quartz tube with PTC, rated for up to 576 sq ft by the maker, with a 12-hour timer and remote control.
View on Amazon -
Lasko 23" Ceramic Tower Space Heater
Its ceramic element and widespread oscillation spread warmth across a room, with 2 heat settings, a 7-hour timer and a remote control.
View on Amazon -
DREO Space Heater
Its PTC ceramic element runs at 1500 watts with 5 modes, a 12-hour timer, a remote control and a noise level of 34 dB.
View on Amazon -
Amazon Basics Ceramic Space Heater
Its three settings cover High at 1500 watts, Low at 900 watts and Fan Only, with tip-over and overheat protection and a noise level of 43 dB.
View on Amazon
These come from our ranked list Best Space Heater, which compares them spec by spec.
FAQ
How much electricity does a space heater use?
The models listed here run at 1500 watts on their high setting. Check the wattage figure on the heater, and plug it into a 120V outlet on a 15 or 20 amp circuit as the maker's manual directs.
Why does my space heater keep switching off?
The thermostat switches the element off once the room reaches the set temperature, then switches it back on as the room cools. A timer can also switch it off, and some heaters switch off on their own if tipped over or if they overheat.
Do space heaters need a special outlet?
They plug into a standard 120V outlet. Plug the heater directly into a wall outlet and follow the maker's manual for placement and outlet use.





