Amazon Black Friday Week deals

Paid link

How-to · Handheld Steam Cleaners

How to Use a Steam Cleaner on Tile and Grout

Short answer

To use a steam cleaner on tile and grout, fill the tank with water, let the cleaner heat up, and work the brush or nozzle along the grout lines. Wipe up the loosened dirt with a cloth, then let the tile dry. Empty the tank when you finish and follow the maker's manual for care.

  1. Fill the tank with water

    Fill the tank with water before you switch the cleaner on. Use plain water unless the manual names its own cleaner or descaler for the tank. Do not add bleach or mix cleaners in the tank. Close the tank and check that the cap or seal sits as the manual shows.

  2. Heat up and pick a steam level

    Switch the cleaner on and wait until it is ready, following the light or indicator the manual describes. The Dupray heats up in 480 seconds, the Foandbevi in 10 seconds, and the Gautye and AULANK in 15 seconds. If your cleaner has steam levels, start low and raise the level if the grout needs more steam.

  3. Work the brush along the grout lines

    Fit the brush or nozzle that suits grout lines, then hold it on the grout and move it slowly along each line. Let the steam loosen the dirt before you wipe. Work one small area at a time so you can see what the steam has loosened. Keep the nozzle pointed at the surface and away from people, pets, and outlets.

  4. Wipe the tile and let it dry

    Wipe the loosened dirt off the tile and grout with a cloth or a microfiber pad. Change to a clean cloth when the one in your hand gets dirty. Let the floor dry before you walk on it or put rugs back. If a grout line still looks dirty, go over it again once the floor is dry.

  5. Empty the tank and store the cleaner

    Unplug the cleaner and let it cool before you open the tank. Pour out the water left in the tank and wipe the tank dry. Descale only with the maker's own descaler and only if the manual allows it. Store the cleaner and its accessories where they stay dry.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Steam Cleaner, which compares them spec by spec.

FAQ

Do I need cleaner in the steam cleaner tank?

No. These cleaners use water to make steam. Use the maker's own cleaner or descaler only if the manual allows it, and never mix cleaners.

Can I use a steam cleaner on sealed tile floors?

The Dupray steamer lists sealed floors among its surfaces, and the Gautye steamer lists sealed hardwood, laminate, vinyl, and sealed stone. Check the manual for your floor and tile before you start.

How do I look after the steam cleaner after use?

Unplug the cleaner and let it cool, then empty the water left in the tank. Wipe the cleaner dry and store it with its accessories where they stay dry.

More handheld steam cleaners how-tos