How-to · Upright Vacuums
How to Clean a Vacuum Brush Roll
To clean a vacuum brush roll, unplug the vacuum, take the brush roll out of the cleaner head, and cut away wrapped hair and thread with scissors. Wipe the roll and the housing with a dry cloth, clear debris from the end caps, and put the roll back so it turns freely. Follow the steps in the maker's manual for your model.
Unplug the vacuum first
Pull the plug out of the outlet before you touch the brush roll. Lay the vacuum on its back or turn the cleaner head over so you can see the brush roll and the cover plate. Keep the manual nearby, since the clips and screws that hold the cover differ from one model to the next.
Remove the brush roll
Unclip or unscrew the cover plate over the brush roll and set the screws aside where you will not lose them. Lift the brush roll out of the housing, noting how the end caps sit in their slots. If the roll has a belt, note how it runs around the roll and the motor spindle before you move anything.
Cut away wrapped hair and thread
Use scissors to cut along the length of the roll through wrapped hair, thread and string, then pull the cut pieces off by hand. Work around the whole roll and check the grooves between the bristle rows, where hair tends to collect. Take care to cut the hair and not the bristles.
Wipe the roll and the housing
Wipe the brush roll with a dry cloth to remove dust and loose debris, then wipe inside the housing and around the end cap slots. Check the end caps for hair wound around them and pull it free. Wash the roll only if the maker's manual says it can be washed, and let it dry fully before it goes back in.
Put the brush roll back and check it
Set the brush roll back in its slots with the end caps seated as they were, refit the belt if your model has one, and replace the cover plate and screws. Turn the roll by hand to check that it spins freely without catching. Plug the vacuum back in and run it briefly to confirm the roll turns.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Shark ZU102 Rotator Pet Upright Vacuum
A self-cleaning brushroll built for pet hair pickup with no hair wrap, plus a 2.9 L dust cup.
View on Amazon -
Bissell Pet Hair Eraser DualBrush Upright Vacuum
Two brush rolls with DualBrush self-cleaning technology, one that agitates and one that conforms.
View on Amazon -
Sanitaire Force Upright Commercial Vacuum SC5845D
A bagless upright with a washable HEPA filter on the exhaust and a removable dirt cup that holds 3.5 quarts.
View on Amazon -
Eureka Lightweight Vacuum Cleaners for Home
A manually controllable brushroll for hard floor and carpet, with swivel steering, LED headlights and a pet turbo brush.
View on Amazon
These come from our ranked list Best Upright Vacuum Cleaner for Basement, which compares them spec by spec.
FAQ
Can I wash a vacuum brush roll with water?
Only if the maker's manual says the roll can be washed. If it can, let it dry fully before you put it back in the vacuum. If it cannot, wipe it with a dry cloth and clear the hair by hand.
How often should I clean the brush roll?
Clean it when you see hair or thread wrapped around the roll, or when the roll stops turning freely. Follow the schedule in the maker's manual for your model.
Why does my brush roll stop spinning?
Hair and debris wound around the ends of the roll or caught in the end caps are the first things to check. Clear them and check that the roll turns by hand. If it still does not turn, contact the maker or a repair service.



