Well Pumps
Best Oil Well Pump (2026): Top 5 by the Specs
As an Amazon Associate I earn from qualifying purchases. Specs below come from each product's Amazon listing; we do not test products in person.
For a shallow well water supply, the Aquastrong leads with a 1.6 HP motor, a 164 ft maximum head and a 5 gallon pressure tank. The Holdwell runner-up pairs a 1.5 HP motor with 1320 GPH flow, while the VEVOR and FOTING also give a 164 ft maximum head. The Acquaer suits a well up to 25 feet deep with a cast iron casing.
Starting out? See the main guide: Best Well Pump
Top picks at a glance
-
Best OverallAquastrong 115V Shallow Well Garden Pump9.8 View on Amazon -
Runner-UpHoldwellS 115V Shallow Well Jet Pump9.5 View on Amazon -
Also GreatVEVOR 1HP Premium Cast Iron Shallow Well9.5 View on Amazon -
9.2 View on Amazon -
Also GreatAcquaer Shallow Well Jet Pump9.2 View on Amazon
Compare the specs
Ranked on motor size, max flow, max lift / head from each listing, plus how many buyers have rated it. A dash (—) means we could not confirm that figure from the listing.
| Pick | Motor size | Max flow | Max lift / head | Weight | Warranty |
|---|---|---|---|---|---|
| 1. Aquastrong 115V Shallow Well Garden Pump | 1.6 HP | — | 164 ft | — | two-year |
| 2. HoldwellS 115V Shallow Well Jet Pump | 1.5 HP | 1,320 GPH | 164 ft | — | — |
| 3. VEVOR 1HP Premium Cast Iron Shallow Well | 1 HP | — | 164 ft | 29.5 lb | — |
| 4. FOTING 1.5HP Shallow Well Pump with Pressure | 1.5 HP | 1,340 GPH | 164 ft | — | — |
| 5. Acquaer Shallow Well Jet Pump | 1 HP | — | — | — | — |
Aquastrong 115V Shallow Well Garden Pump
It pairs a 1.6 HP motor with a 164 ft maximum head, a 5 gallon pressure tank and a two-year warranty.
- Motor size: 1.6 HP, the most here
- Max lift / head: 164 ft
- Two-year warranty stated
Good for
- Owners of homes, cabins or farms who want one pump for irrigation and domestic supply
- Buyers who want a stainless steel pump with a pressure tank
Skip it if
- You need suction past 26 ft
- You need flow past 1340 GPH
It has a stainless steel casing and a carbon ceramic mechanical seal, and it carries NSF certification. The pressure switch starts the pump at 20 psi and shuts it off at 40 psi, with a pressure gauge on the tank. It has a 6.5-foot power cord, 1 inch NPT inlet and outlet with garden hose adapters, and temperature sensing with automatic overload stop.
HoldwellS 115V Shallow Well Jet Pump
It pairs a 1.5 HP motor with 1320 GPH flow, a 164 ft maximum head and a 5 gallon pressure tank.
- Motor size: 1.5 HP
- Max flow: 1,320 GPH
- Max lift / head: 164 ft
Good for
- Buyers who want a stainless steel pump head with a pressure tank
- Owners of lawns, gardens or farms who want one pump for irrigation
Skip it if
- You need suction past 26 ft
- You need flow past 1320 GPH
It has a stainless steel pump head with an aluminum housing and a carbon ceramic mechanical seal. The automatic pressure switch starts and stops the pump with the water valve, and it has overheat protection and an IPX4 rating. It has 1 inch NPT inlet and outlet with 2 adapters, and a pressure gauge on the tank.
VEVOR 1HP Premium Cast Iron Shallow Well
It pairs a 1 HP cast iron pump with a 164 ft maximum head and a pressure switch that runs from 20 to 40 PSI.
- Motor size: 1 HP
- Max lift / head: 164 ft
Good for
- Buyers who want a cast iron pump for garden and farm irrigation
- Owners of large homes, farms or small cottages who want one pump
Skip it if
- You want to carry the pump between rooms and need less than 29.5 lb
- You need lift past 164 ft
It has a cast iron body with rear cooling vents and built-in thermal protection. The pressure switch runs from 20 to 40 PSI and turns the pump on and off with the faucet. It weighs 29.5 lb and measures 14.4 by 11.2 by 8.3 inches, and it needs priming before use.
FOTING 1.5HP Shallow Well Pump with Pressure
It pairs a 1.5 HP motor with 1340 GPH flow, a 164 ft maximum head and a 5 gallon pressure tank.
- Motor size: 1.5 HP
- Max flow: 1,340 GPH
- Max lift / head: 164 ft
Good for
- Buyers who want a pump with a pressure tank for home water pressure
- Owners of lawns, gardens or farms who want one pump for irrigation
Skip it if
- You need suction past 23 ft
- You need flow past 1340 GPH
It has a reinforced thermoplastic structure with an iron tank and a carbon ceramic mechanical seal. The pressure switch starts the pump at 1.5 bar and shuts it off at 3 bar, with a pressure gauge on the tank. It has overheat protection, 1 inch NPT inlet and outlet with 2 adapters, and a three-year after-sale service.
Acquaer Shallow Well Jet Pump
It pairs a 1 HP cast iron pump with an automatic pressure switch and a pressure gauge on the casing.
- Motor size: 1 HP
Good for
- Buyers who want a cast iron pump for a well up to 25 ft deep
- Owners of homes who want a pressure booster with a gauge
Skip it if
- You need a well deeper than 25 ft
- You need pressure past 40 PSI
It has a cast iron casing with overheat protection that shuts the pump off when the water runs out. The automatic pressure switch starts the pump when pressure falls lower than 20 PSI and shuts it off when pressure goes over 40 PSI. It has a pressure gauge on the casing and is designed for wells up to 25 feet deep.
How to choose
Compare maximum head and suction depth
Maximum head is the lift a pump gives, and suction depth is how deep it draws from. The Aquastrong, Holdwell, VEVOR and FOTING give a 164 ft maximum head, while the Acquaer is designed for wells up to 25 feet deep. Suction depth differs too: the Aquastrong and Holdwell draw from up to 26 ft, and the FOTING draws from up to 23 ft. Match both figures to your well before choosing, since head and suction depth are different figures.
Read flow and pressure switch settings
Flow is the volume a pump moves, and the pressure switch sets when it starts and stops. The Aquastrong gives 1340 GPH, the Holdwell gives 1320 GPH and the FOTING gives 1340 GPH. The Aquastrong and VEVOR switches run from 20 to 40 PSI, the Acquaer switch starts lower than 20 PSI and shuts off over 40 PSI, and the FOTING switch starts at 1.5 bar and shuts off at 3 bar. Compare flow with the switch range for the home or garden use you have in mind.
Priming, tanks and upkeep
Priming fills the pump with water before first use, and a pressure tank holds pressure between runs. The Aquastrong, Holdwell and FOTING have a 5 gallon pressure tank, and each of those three has a pressure gauge. Prime the pump before startup, keep it from freezing in winter, and drain it if it will sit unused.
FAQ
What motor sizes do these pumps have?
The Aquastrong has a 1.6 HP motor, the Holdwell and FOTING have 1.5 HP motors, and the VEVOR and Acquaer have 1 HP motors.
Do these pumps have pressure tanks?
The Aquastrong, Holdwell and FOTING have a 5 gallon pressure tank, each with a pressure gauge.
What well depth does the Acquaer suit?
The Acquaer is designed for wells up to 25 feet deep, with a 1 HP motor and a cast iron casing.
What should I check before first use?
Prime the pump with water before first use, and check the pressure switch range for the pump you choose.
