How-to · Air Purifiers
How to Replace an Air Purifier Filter
To put a filter in an air purifier, switch the purifier off and unplug it, open the filter compartment, and lift out the old filter. Fit the new filter the same way round, then close the cover and plug the purifier back in. Use the maker's own filter type for your model, and reset the filter indicator if your purifier has one.
Switch off and unplug the purifier
Press the power button to switch the purifier off, then pull the plug from the outlet. Move the purifier to a flat surface where you can reach all sides of it. Open the filter compartment as the maker's manual shows, and keep the cover where it will not fall. Do not open the purifier further than the manual shows, and contact the maker or a repair service if a part inside needs work.
Lift out the old filter
Lift the old filter out of the compartment and set it on a sheet of paper or in a bag. Look at which way it faced before you remove it, so the new one goes in the same way round. A filter that looks grey or clogged with dust is a sign it needed changing. Check the compartment for dust and wipe it with a dry, soft cloth if the manual allows it.
Fit the new filter in place
Take the new filter out of its packaging and check that it matches the maker's own type for your model. Hold it the same way round as the old one, with any arrows or marks facing the direction the manual shows. Lower it into the compartment and press it gently until it sits flat and even, with no gaps at the edges. Do not force a filter that does not fit, and check the model number again if it will not sit flat.
Close the cover and switch on
Put the cover back on the compartment and press it until it clicks or sits flush, as the manual shows. Plug the purifier back in and switch it on. If your purifier has a filter indicator, reset it as the manual says so it tracks the new filter. Run the purifier and check that air moves through it and the cover stays shut.
Look after a washable pre-filter
Some purifiers have a pre-filter that catches larger dust and hair before the main filter. If your model has one and the manual says it can be washed, rinse it with water and let it dry fully before it goes back in. Never wash a main HEPA filter unless the manual says it is washable.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Levoit Air Purifier for Home Pets Hair
Its 3-in-1 filter comes pre-installed, its check filter indicator shows when the filter needs attention, and its CADR is 143 CFM.
View on Amazon -
LivePure True HEPA Air Purifier & Humidifier
Its True HEPA filter and coconut carbon pre-filter are replaceable, and the pre-filter can be vacuumed and washed.
View on Amazon -
ECOSELF Air Purifier for Large Room
It uses a 3-stage True HEPA filter, and its display shows PM2.5 readings while its fan runs on 3 speeds.
View on Amazon -
Shark NeverChange Air Purifier
Its NeverChange HEPA filter comes with a washable Debris Defense screen and an Odor Neutralizer cartridge.
View on Amazon
These come from our ranked list Best Air Purifier, which compares them spec by spec.
FAQ
How do I know which filter fits my purifier?
Use the maker's own filter type for your model, and check the model number on the purifier before you buy. A filter made for another model may not sit flat in the compartment or may leave gaps at the edges.
Can I wash an air purifier filter with water?
Only if the maker's manual says the filter is washable. Rinse it with water only when the manual allows it, and let it dry fully before you put it back.
How often should I change the filter?
Follow the schedule in the maker's manual, and change the filter sooner if it looks grey, if dust clogs it, or if a filter indicator on the purifier asks for a change. A filter that stays dirty after tapping it clean also needs replacing.




