How-to · Blenders
How to Remove Rust From a Tea Kettle
Unplug the blender, lift out the blades if they come out, and wash off loose rust with warm water and mild dish soap. For rust that stays, soak the blades in white vinegar if the manual allows it, then scrub with a soft brush, rinse and dry them fully before you put them back. Blades with deep pitting or rust that will not come off need replacing through the maker.
Unplug the blender and take it apart
Unplug the blender before you touch the blades. Lift the jar off the base and take out the blade assembly if it comes out, following the manual. Set the base aside and keep it dry. Lay the jar, lid and blades on a towel so you can see the rust and reach all sides of the blades.
Wash off loose rust
Rinse the blades under warm running water and wash them with mild dish soap and a soft cloth or brush. Work around each blade edge and the base of the assembly where rust collects. Rinse again and look at the blades in good light. If the rust is gone, dry the blades fully and put the blender back together.
Soak rust that stays
For rust that stays after washing, soak the blades in white vinegar if the manual allows it. Cover the rusty parts and leave them until the rust loosens, then lift the blades out and scrub the spots with a soft brush. Rinse well with warm water and dry the blades fully. Do not mix cleaners, and use the maker's own cleaner if the manual names one.
Dry the blades and reassemble
Dry the blades, jar and lid fully before you put the blender back together. Water left on the blades brings the rust back, so wipe each part and let it air dry on a towel. Put the blade assembly back as the manual shows and set the jar on the base. Run a short blend of plain water to check that the blades turn freely.
Know when to replace the blades
Replace the blades when rust has eaten into the metal, when pits stay after soaking and scrubbing, or when the edge is chipped or bent. Order the maker's own replacement part for your model and follow the manual to fit it. Do not try to repair the motor or parts inside the base; contact the maker or a repair service for those.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Hamilton Beach Power Elite Blender For Smoothies
Its removable stainless steel blades and 40 oz glass jar go in the dishwasher, so the blades come out for a close clean.
View on Amazon -
Ninja Professional Plus Blender
Its stacked blade assembly lifts out of the 72 oz pitcher and goes in the dishwasher top rack for washing apart from the base.
View on Amazon -
BLACK+DECKER Countertop Blender with 6-Cup Glass Jar
Its removable 4-point stainless steel blade lifts out of the 6-cup glass jar, and every removable part goes in the dishwasher.
View on Amazon
These come from our ranked list Best Blender, which compares them spec by spec.
FAQ
Can I put rusty blender blades in the dishwasher?
Yes, if the manual allows it. The Hamilton Beach, Ninja and BLACK+DECKER blenders in this guide all have removable blades and parts that go in the dishwasher. Rinse off loose rust first, then dry the blades fully after the cycle.
Does white vinegar remove rust from blender blades?
It loosens surface rust so you can scrub it off, if the manual allows vinegar on your model. Soak only the blades, scrub with a soft brush, then rinse well and dry fully. Rust that has eaten into the metal will not come off this way.
How do I keep blender blades from rusting again?
Dry the blades fully after every wash and do not leave them sitting in water. Put the blender back together only when every part is dry, and store it in a dry place. Follow the care steps in the maker's manual.





