How-to · Clothes Irons
How to Remove Scorch Marks from an Iron
Unplug the iron and let the soleplate cool, then wipe it with a soft cloth dampened with water. Repeat the wipe for marks that stay, and use the iron's self-clean feature if it has one. Check the maker's manual before you use mild dish soap or vinegar on the soleplate, and never scrape the surface with a sharp tool.
Unplug and let the iron cool
Switch the iron off and unplug it before you touch the soleplate. Let the iron cool until the soleplate is cool to the touch, and set it on its heel while it cools. A hot soleplate can spread melted fabric, so wait until it is cool. Do not run water over a hot iron or plug it back in until the soleplate is clean and dry.
Wipe the soleplate with a damp cloth
Dampen a soft cloth with water and wipe the soleplate in one direction. For the BLACK+DECKER iron, wipe the soleplate and outer surfaces with a soft cloth dampened with water. Wipe again with a clean damp cloth to lift the loosened residue. Do not use a scouring pad or a sharp tool on the soleplate, since scratches give residue a place to hold.
Use the self-clean feature
If the iron has a self-clean feature, use it after the wipe. The PurSteam iron has a self-cleaning feature and an anti-calc system to keep the soleplate gliding smoothly. Run the self-clean cycle as the manual shows, then wipe the soleplate again with a soft cloth dampened with water.
Soap or vinegar for marks that stay
For marks that stay after wiping with water, use mild dish soap or white vinegar only if the manual allows it. Dampen the cloth with the soap solution or vinegar, wipe the soleplate, and wipe again with a clean cloth dampened with water. Do not mix cleaners, and do not use bleach on the soleplate. If the mark stays after that, follow the cleaning instructions in the maker's manual.
Stop the marks from coming back
Set the iron to the fabric you are pressing. The Impress iron has a fabric selector, and the PurSteam iron has preset modes for synthetics, silk, wool, cotton and linen. Let the iron heat to the setting before you press, and do not leave the iron sitting face down on fabric. The BLACK+DECKER iron shuts off on its own if left inactive, and the PurSteam iron shuts off after 30 seconds horizontal, 8 minutes vertical, or 30 seconds tipped sideways.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
BLACK+DECKER Easy Steam Compact Iron for Clothes
Wipe its nonstick soleplate and outer surfaces with a soft cloth dampened with water, and it shuts off on its own if left inactive.
View on Amazon -
PurSteam SteamBurst+ Steam Iron
Its self-cleaning feature and anti-calc system help keep the soleplate gliding, and it shuts off after 30 seconds horizontal, 8 minutes vertical, or 30 seconds tipped sideways.
View on Amazon -
Hamilton Beach Steam Iron for Clothes
Its spray button and blast button give a burst of steam for wrinkles, and its 8 ft retractable cord pulls back into the iron for storage.
View on Amazon -
Impress Basic Clothing Iron
Its non-stick soleplate, spray, variable steam and fabric selector suit pressing, with a swivel cord.
View on Amazon
These come from our ranked list Best Clothes Iron, which compares them spec by spec.
FAQ
Can I use vinegar on the soleplate?
Only if the maker's manual allows it. Dampen a soft cloth with white vinegar, wipe the soleplate, and wipe again with a clean cloth dampened with water.
What should I not use on the soleplate?
Do not use a scouring pad, a sharp tool or bleach, and do not mix cleaners. Wipe with a soft cloth dampened with water, and use the self-clean feature if the iron has one.
How do I stop scorch marks from coming back?
Set the iron to the fabric you are pressing, and let it heat to the setting before you press. The Impress iron has a fabric selector, and the PurSteam iron has preset modes for synthetics, silk, wool, cotton and linen.




