Amazon Black Friday Week deals

Paid link

How-to · Clothes Irons

How Does a Steam Iron Work

Short answer

A steam iron works by heating its soleplate and turning water from its tank into steam, which escapes through holes in the soleplate and relaxes the fabric so the plate can press it flat. A dial sets the heat for the fabric, and a steam control sets how much steam comes out.

  1. Heat turns water into steam

    Fill the tank with water, plug the iron in and set the dial. The heating element warms the soleplate, and water from the tank feeds onto the hot plate, where it turns to steam. The PurSteam iron heats in 30 seconds, and the Hamilton Beach iron heats up in under 1 minute. Wait for the iron to reach the set heat before you press, or the water will drip instead of turning to steam.

  2. Steam escapes through the soleplate

    Steam leaves the iron through holes in the soleplate and passes into the fabric. The heat and moisture relax the fibers so the flat plate can press them smooth, and a burst of steam adds extra steam for a stubborn wrinkle. The PurSteam iron directs steam through axial holes in its soleplate, and its spray button and burst of steam add moisture where the fabric needs it.

  3. The dial matches heat to fabric

    Set the dial to the fabric you are pressing, since each fabric takes its own heat. The PurSteam iron has preset modes: low for synthetics, viscose and polyester, medium for silk and wool, and high for cotton and linen. The Impress iron has a fabric type selector, and the BLACK+DECKER iron suits cotton, wool, blend, polyester, rayon, nylon and synthetic fabrics. Turn the steam off to dry-iron a delicate fabric.

  4. Shutoff and anti-drip do the watching

    Both the BLACK+DECKER and PurSteam irons have a 3-way auto shutoff that switches the iron off when it sits unmoved on its heel, side or soleplate. Their anti-drip systems hold water back when the soleplate is too cool to make steam, so water does not drip onto the fabric. The PurSteam iron also has a self-clean feature that keeps the soleplate gliding smoothly.

  5. Steam works on hanging clothes too

    Hold the iron upright and use a burst of steam on clothes that hang, with no board under them. The PurSteam iron works as a handheld steamer for drapes and hanging clothes, and the Hamilton Beach iron has a vertical steam function that directs steam onto hanging clothes. Keep the soleplate away from the fabric while you steam upright, and let the steam do the work.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Clothes Iron, which compares them spec by spec.

FAQ

Do I need to wait for the iron to heat up?

Yes. Wait until the iron reaches the set heat so water turns to steam instead of dripping. The PurSteam iron heats in 30 seconds, and the Hamilton Beach iron heats up in under 1 minute.

Why does my iron drip water?

It drips when the soleplate is too cool to turn water into steam. Turn the heat up to the setting for the fabric, wait for the iron to reach it, and check the manual if dripping keeps happening.

Can I use tap water in a steam iron?

The PurSteam iron uses regular tap water. For the other irons here, follow the manual for the water it takes, and empty the tank after use if the manual says so.

More clothes irons how-tos