How-to · Clothes Irons
How to Clean Steam Iron Vents
To clean steam iron vents, unplug the iron and let it cool, then wipe the soleplate with a soft cloth dampened with water. Run the steam burst or the self-clean function over a sink to push water through the vents, then wipe the soleplate again and let the iron dry. Check the maker's manual first, since cleaning steps differ by iron.
Unplug the iron and let it cool
Unplug the iron before you clean it, and let it cool until the soleplate is cool to the touch. Empty the water tank over a sink so no water sits in the iron while you work. A cool iron is easier to handle, and an empty tank keeps water from dripping onto your work surface as you wipe the vents.
Wipe the soleplate and vents
Dampen a soft cloth with water and wipe the soleplate, working around the vent holes to lift loose scale and dirt. Wipe in one direction and rinse the cloth often so you are not spreading dirt back over the soleplate. For a mark that stays, dampen the cloth with a little white vinegar if the manual allows it, then wipe again with plain water.
Flush the vents with steam
Fill the tank with water and let the iron heat up, then hold it over a sink and press the steam burst button to push water through the vents. The PurSteam iron has a self-clean function, and the Hamilton Beach iron has a steam blast button, so use the function your iron has as the manual says. Repeat until the steam runs clear, then wipe the soleplate dry.
Dry the iron before you store it
Wipe the soleplate dry with a soft cloth and leave the iron upright until it is fully dry. Empty any water left in the tank so it does not sit in the iron between uses. If the vents stay blocked after cleaning, contact the maker or a repair service instead of opening the iron yourself.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
BLACK+DECKER Easy Steam Compact Iron for Clothes
A compact iron with a nonstick soleplate, a 3-way auto shutoff and an easy-fill water tank; wipe the soleplate with a soft cloth dampened with water.
View on Amazon -
PurSteam SteamBurst+ Steam Iron
A 2.2 lb iron with a self-clean function, an anti-drip system and a 3-way auto shutoff, and it uses regular tap water.
View on Amazon -
Hamilton Beach Steam Iron for Clothes
A 1,200 W iron with an 8 ft retractable cord, a steam control switch and a vertical steam function for hanging clothes.
View on Amazon -
Impress Basic Clothing Iron
A compact 1.5 lb iron with a non-stick soleplate, adjustable steam and a fabric selector.
View on Amazon
These come from our ranked list Best Clothes Iron, which compares them spec by spec.
FAQ
Can I use vinegar to clean steam iron vents?
Only if the maker's manual allows it. Wipe the soleplate with a soft cloth dampened with water first, and use a little white vinegar only where the manual allows it. Never mix cleaners, and never put bleach in the iron.
Why does my iron spit water from the vents?
The vents drip when the iron is not hot enough to turn water into steam. Wait until the iron has heated fully before you press the steam button. The anti-drip system on the PurSteam and BLACK+DECKER irons helps stop dripping at low heat.
Can I poke the vents clean with a pin?
No. Do not push a pin or any tool into the vents, since it can damage the iron. Wipe the soleplate with a soft cloth dampened with water and use the self-clean function if your iron has one. If the vents stay blocked, contact the maker or a repair service.





