How-to · Coffee Makers
How Often to Descale a Coffee Machine
Descale when the maker's decalcify indicator signals, or when the schedule in the maker's manual says so. The Cuisinart has a decalcify indicator and a self-clean cycle, and the Ninja has a Clean setting that descales at the touch of a button. Run the descale cycle with white vinegar or the maker's own descaler, if the manual allows it.
Check the manual and the indicator
Start with the maker's manual, which gives the descale schedule for that model. The Cuisinart has a decalcify indicator that signals when cleaning is due, and the Ninja has a Clean setting that descales at the touch of a button. When the indicator signals, or when the manual's schedule says so, it is time to descale. Follow the manual's steps for the descale cycle, and use only white vinegar or the maker's own descaler, if the manual allows it.
Empty the carafe and the reservoir
Switch the coffee maker off and unplug it before you open it. Pour out the coffee that is left in the carafe, and take out the used grounds and the filter. Lift out the reservoir where it comes out, as on the Ninja with its removable reservoir, and pour out the water that is left. A clear carafe and a clear reservoir keep old coffee and old water out of the descale cycle.
Fill with vinegar or the maker's descaler
Fill the reservoir with white vinegar or the maker's own descaler, if the manual allows it. Use the water window to see the level as you fill, as the Hamilton Beach does with a window on each side and the BLACK+DECKER does with a front-facing window. Do not mix cleaners, and never use bleach. Put the empty carafe back in place and close the lid before you start the cycle.
Run the descale cycle
Run a brew cycle with the vinegar or descaler in the reservoir, or press the Clean setting on the Ninja and the self-clean cycle on the Cuisinart. Let the cycle run through to the end, then pour the liquid out of the carafe. If the manual calls for a pause partway through, follow it. Switch the maker off when the cycle ends and let it cool before you open it.
Rinse with fresh water
Fill the reservoir with fresh water and run a full brew cycle, then pour the water out. Run another fresh water cycle if the manual says to, or until no vinegar smell is left in the carafe. Put a clean filter in place and brew a fresh pot when the rinse is done. Keep the carafe and the reservoir dry between uses, and descale again when the indicator signals or the manual's schedule says so.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Hamilton Beach 2-Way Programmable Coffee Maker
Two separate easy-fill water reservoirs with a water window show how much water is on each side when you fill it for a descale run.
View on Amazon -
Cuisinart PerfecTemp 14-Cup Programmable Drip Coffee Maker
A self-clean cycle runs at the press of a button, and a decalcify indicator signals when cleaning is due.
View on Amazon -
BLACK+DECKER 12-Cup Drip Coffee Maker with Vortex
A 12-cup Duralife glass carafe has measurement markings for accurate filling, and the front-facing water window shows the water level.
View on Amazon -
Ninja Fresh Brew Coffee Maker
A Clean setting descales the coffee maker at the touch of a button, and the 60-oz. removable water reservoir carries to the sink for easy filling.
View on Amazon
These come from our ranked list Best Coffee Machine, which compares them spec by spec.
FAQ
How often should I descale my coffee machine?
Follow the schedule in the maker's manual. On the Cuisinart, the decalcify indicator signals when cleaning is due, and the Ninja has a Clean setting for the same job. When the indicator signals or the schedule says so, run a descale cycle.
Can I use vinegar to descale a coffee machine?
Yes, if the manual allows it. White vinegar is one of the cleaners the manual may name, along with the maker's own descaler. Do not mix cleaners, and never use bleach.
Does a coffee maker tell me when to descale it?
Some do. The Cuisinart has a decalcify indicator that signals when cleaning is due, and the Ninja has a Clean setting that descales at the touch of a button. For every maker, the manual gives the descale schedule to follow.




