Amazon Black Friday Week deals

Paid link

How-to · Dehumidifiers

How to Clean a Dehumidifier

Short answer

To clean a dehumidifier, unplug it, empty the water tank, and wash the tank with water and mild dish soap if the manual allows it. Rinse or wash the filter only if the manual says it is washable, wipe the outside with a damp cloth, and let every part dry fully before you put it back. Clean the tank and filter when the tank smells or the filter looks grey.

  1. Unplug and empty the tank

    Unplug the dehumidifier before you touch any part of it. Lift out the water tank and pour the water away, then set the tank aside. If the unit uses a drain hose for continuous drainage, pull the hose off and let the water in it drain out. Check the tank for dirt or a film on the inside walls before you wash it.

  2. Wash the water tank

    Wash the tank with warm water and mild dish soap, or with white vinegar if the manual allows it. Scrub the inside walls and the corners where dirt collects, then rinse the tank until the water runs clear. Never mix cleaners, and never use bleach. Let the tank dry fully in open air before you put it back, so no damp stays inside it.

  3. Clean the washable filter

    Slide the filter out of the unit and tap it over a trash can until the dust falls off. Rinse it with water only if the manual says the filter is washable, and let it dry fully before it goes back in. A filter that still looks grey after rinsing needs a new one from the maker. Never run the unit with the filter out or with a wet filter in place.

  4. Wipe the outside and put it back

    Wipe the outside of the unit and the air intake with a damp cloth to remove dust. Check the drain hose for dirt and rinse it with water if the manual allows it. Put the dry tank and the dry filter back, plug the unit in, and run it as the manual says. If the unit still gives a full-tank alert or will not start, contact the maker or a repair service.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Dehumidifier, which compares them spec by spec.

FAQ

Can I wash a dehumidifier filter with water?

Only if the manual says the filter is washable. If it is, rinse it with water and let it dry fully before you put it back. If it is not washable, tap it clean over a trash can and replace it when it stays grey.

How often should I clean a dehumidifier?

Clean it when the tank smells, the filter looks grey, or the full-tank light comes on, and follow the schedule in the maker's manual.

What should I use to clean the water tank?

Water and mild dish soap work for the tank, or white vinegar if the manual allows it. Never mix cleaners, and never use bleach. Rinse the tank until the water runs clear and let it dry fully before you put it back.

Why does my dehumidifier stop and show a full tank?

The tank is full, so the unit shuts off and waits for you to empty it. Empty the tank, put it back in place, and check that the drain hose is clear if the unit uses one.

More dehumidifiers how-tos