Amazon Black Friday Week deals

Paid link

How-to · Dehumidifiers

How to Use a Dehumidifier

Short answer

To use a dehumidifier, place it upright on a flat floor, plug it into a 120V outlet, set a humidity level on the control panel, and empty the water tank when the full-tank indicator shows. Fit the drain hose for continuous drainage if you want to skip emptying the tank. Clean the tank and the filter as the maker's manual says.

  1. Place it on a flat floor

    Set the unit upright on a flat floor where air can move around it, and leave the front and back clear so air flows through. Keep it away from walls and furniture that stand in front of the intake and outlet. Keep the unit upright at all times, including when you move it from room to room.

  2. Plug it in and set the level

    Plug the unit into a 120V outlet and switch it on at the control panel. Set a humidity level and pick a fan speed to match the room. The unit senses the air and runs until the room reaches the level you set, then holds it by switching on and off as the air changes. If your unit has a timer, use it to set run times.

  3. Empty the tank or fit the hose

    Watch the full-tank indicator. When it shows, pull the tank out, empty it, and slide it back in until it sits flat. For longer runs without emptying, fit the drain hose to the outlet as the maker's manual shows and run the hose to a floor drain or a sink, with the hose sloping down so water flows out. Check the hose connection for drips after you fit it.

  4. Clean the tank and the filter

    Unplug the unit before you clean it. Empty the tank and wipe it out with water and mild dish soap if the manual allows it, then rinse and let it dry. Tap the filter clean over a trash can, and rinse it only if the manual says it is washable. Let the filter dry fully before it goes back in, and follow the schedule in the maker's manual.

  5. Check it on a routine

    Look at the filter when it looks grey, and look at the tank when it smells or the water looks cloudy. Check the hose connection and the tank seat when water appears where it should not. Follow the schedule in the maker's manual for filter and tank care, and contact the maker or a repair service if the unit stops running with the tank empty and the filter clean.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Dehumidifier, which compares them spec by spec.

FAQ

How do I know when to empty the tank?

Watch the full-tank indicator. When it shows, pull the tank out, empty it, and slide it back in until it sits flat. A drain hose fitted for continuous drainage means you do not need to empty the tank.

Can I leave a dehumidifier running all the time?

Yes, if the tank is emptied or a drain hose is fitted for continuous drainage. If your unit has a timer, use it to set run times. Follow the schedule in the maker's manual for longer runs.

Why does my dehumidifier stop running?

A full tank is the first thing to check. If the tank is empty, let the auto-defrost function run if the coil has frost on it. If it still does not run, unplug it and contact the maker or a repair service.

Do I need to clean the filter?

Yes. Tap the filter clean over a trash can, and rinse it only if the manual says it is washable. Let it dry fully before it goes back in, and follow the schedule in the maker's manual.

More dehumidifiers how-tos