Amazon Black Friday Week deals

Paid link

How-to · Furnace Filters

How to Choose an Air Filter

Short answer

To choose an air filter, match the size printed on your old filter, pick a MERV rating for the particles you want to catch, and check that the thickness fits your furnace or air conditioner slot. A 16x25x1 filter with a MERV 11 or MERV 13 rating catches smaller particles than a MERV 8 filter. Change it when it looks dirty or the maker's manual says to.

  1. Match the size on your old filter

    Start with the size printed on the frame of the filter you are replacing, or measure the old filter yourself. A nominal size such as 16x25x1 is not the exact size, so check the actual size too: the Simply, Aerostar and Amazon Basics filters have an actual size of 15.75 x 24.75 x 0.75 inches. A filter that is too small leaves gaps at the edges, and a filter that is too big will not slide into the slot. If the size on your old filter is worn away, measure the slot in your furnace or air conditioner and match the nominal size to it.

  2. Compare MERV ratings

    The MERV rating tells you how fine the particles are that a filter is rated to catch. MERV 8 catches particles in the 3.0 to 10.0 micron range, while MERV 11 is rated for microparticles from 0.3 to 1.0 micron, and MERV 13 is rated higher still. The same ratings are also sold under other scales: MERV 8 lines up with MPR 600 and FPR 5, MERV 11 with MPR 1000, and MERV 13 with MPR 1500 to 1900 and FPR 10. Pick the rating that matches what your system manual allows, since a higher rating does not suit some systems.

  3. Check the fit for your system

    Check that the filter suits the equipment you have before you buy. The Simply filter works with air conditioners, furnaces and heat pumps, while the other three work with furnaces and air conditioners. They slide into a 1-inch filter slot or a return grille. The Amazon Basics filter has a beverage board frame with wire mesh support, and its synthetic material is electrostatically charged. Read your furnace or air conditioner manual for the size and rating it allows, and follow the manual if it limits the rating you can use.

  4. Plan how often to change it

    A filter that looks grey or clogged with dust is due for a change, and so is one that has been in place for the full stretch the maker gives. The Simply and Aerostar filters give up to 3 months of filtration, the Filtrete filter is a 3-month filter to change at least once every 90 days, and the Amazon Basics 6-pack gives replacements for up to 12 months with changes every 60 to 90 days. Set a reminder if your filter app offers one, and follow the schedule in the maker's manual.

  5. Fit it with the airflow arrow

    Slide the new filter into the slot or return grille with the airflow arrow pointing toward the furnace or blower, away from the return grille. Check the airflow arrow before you push the filter all the way in. A filter put in backwards still sits in the slot, but the air will not pass through it the way the maker planned. Close the cover or grille after the filter is seated, then run the system as usual and check that air is moving through the vents.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best 16x25x1 Hvac Filter, which compares them spec by spec.

FAQ

What size air filter do I need?

Use the size printed on the frame of your old filter, or measure the old filter and the slot it sits in. A nominal size such as 16x25x1 is not the exact size, so check the actual size as well before you buy.

Is a higher MERV rating always better?

No. A higher MERV rating catches finer particles, but your system manual may limit the rating you can use. Match the rating to what your furnace or air conditioner allows, and to the particles you want to catch.

How do I know when to change my air filter?

Change it when it looks grey or clogged with dust, when air flow through the vents drops, or when an app reminder or a light on your system asks for a change. Follow the schedule in the maker's manual.

More furnace filters how-tos