How-to · Furnace Filters
How to Clean an Air Filter at Home
For the pleated filters in this guide, cleaning means replacing: switch the system off, slide the old filter out, and slide a new one in with the airflow arrow pointing toward the furnace. Wash a filter with water only if the manual says it is washable, and let it dry fully before it goes back. Change the filter when it looks grey or when the maker's schedule says so.
Switch the system off
Turn the furnace or air conditioner off at the thermostat before you touch the filter. Find the filter slot on the unit or the return grille on the wall or ceiling. Note which way the airflow arrow on the old filter points before you move it.
Slide the old filter out
Pull the old filter straight out of the slot and carry it flat so loose dust stays on it. Look at the size printed on the frame and keep the old filter beside you until the new one is in. Put the old filter in a bag and drop it in the trash.
Wash only a washable filter
These pleated filters are changed, not washed, so check the manual first. If the manual says the filter is washable, rinse it with water and mild dish soap, or with white vinegar if the manual allows it. Rinse it well, let it dry fully, and never put a damp filter back in the unit.
Slide the new filter in
Match the size on the new filter frame to the old one, and point the airflow arrow toward the furnace or blower, away from the return grille. Slide the filter in until it sits flat in the slot, then close the cover or grille. Switch the system back on and check that air moves through the vents.
Set a reminder for the next change
Write the date on the filter frame or set a phone reminder for the next change. Follow the schedule in the maker's manual, and change the filter sooner if it looks grey or airflow drops. Keep a spare from the pack on hand so the next change takes minutes.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Filtrete 20x25x1 Air Filter
A 6-pack of MERV 5 filters in 20x25x1, sized for standard furnace and AC systems, with a 3-month change schedule.
View on Amazon -
Amazon Basics 20x20x1 Air Filter 6-Pack
A 6-pack of MERV 11 filters in 20x20x1, made with electrostatically charged synthetic material that captures particles as small as 3 microns.
View on Amazon -
Simply 20x20x1 Air Filter
A 6-pack of MERV 8 filters in 20x20x1, rated MPR 600, with up to 3 months of filtration.
View on Amazon -
Aerostar Air Filter 20x20x1 MERV 8 AC
A 6-pack of MERV 8 filters in 20x20x1, rated MPR 600, with a moisture-resistant backing.
View on Amazon
These come from our ranked list Best AC Filters for Home, which compares them spec by spec.
FAQ
Can I wash a furnace filter with water?
Only if the maker's manual says it is washable. The pleated filters here are changed on a schedule, so slide in a fresh one when the old one looks grey or the schedule says so.
How often should I change the filter?
Follow the schedule in the maker's manual. Filtrete gives at least once every 90 days, and Amazon Basics gives every 60 to 90 days.
Which way does the airflow arrow point?
Toward the furnace or blower, away from the return grille. Check the arrow on the old filter before you slide it out, and match it when the new one goes in.
What size filter do I need?
Read the size printed on the old filter frame and match it. The filters here come in 20x25x1 and 20x20x1, with actual sizes a fraction smaller than the nominal size.





