How-to · Furnace Filters
How to Clean Metal Furnace Filters
To clean a metal furnace filter, switch the furnace off, slide the filter out, and rinse it with water, using mild dish soap if the manual allows it. Rinse it until the water runs clear, let it dry fully, then slide it back in with the airflow arrow pointing toward the furnace. Disposable pleated filters are not washed; replace them when they look gray or the manual says to.
Switch the furnace off and remove the filter
Switch the furnace off at the thermostat and the power switch before you touch the filter. Find the filter slot on the furnace or the return grille and slide the filter out. Note which way the airflow arrow on the frame points, so you put it back the same way. Check the frame for the size printed on it, and check the manual for whether your filter is a washable metal type or a disposable type.
Rinse the metal filter with water
Take the metal filter outside or to a sink or tub and rinse it with water from a hose or tap. Work from the side the air leaves, so dirt washes out the way it came in. Use mild dish soap only if the manual allows it, and rinse until the water runs clear. Do not use bleach or mix cleaners, and do not scrub the mesh with a stiff brush.
Let the filter dry fully
Stand the filter upright where air moves around it and let it dry fully before it goes back in the furnace. A damp filter can hold dust in place and restrict airflow, so wait until the mesh and the frame feel dry to the touch. Do not put a wet filter back in the slot. If the frame is bent or the mesh is torn, replace the filter instead of cleaning it again.
Slide the filter back in
Slide the dry filter back into the slot with the airflow arrow pointing toward the furnace or blower, away from the return grille. Push it in until it sits flat and the edges meet the frame of the slot. Switch the furnace back on at the power switch and the thermostat. Check the filter again when it looks gray, and follow the schedule in the maker's manual.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Simply 16x25x1 Air Filter
A MERV 8 pleated filter in a 6-pack, sized 16x25x1, made with electrostatically charged synthetic fiber and a pleated build.
View on Amazon -
Aerostar Air Filter 16x25x1 MERV 13 AC
A MERV 13 pleated filter in a 6-pack, sized 16x25x1, with a heavy-duty beverage board frame and moisture-resistant backing.
View on Amazon -
Filtrete 16x25x1 Air Filter
A MERV 11 filter with a 1000 MPR rating, sold as a 2-pack of 3-month filters sized 16x25x1, with the Filtrete Smart App for change reminders.
View on Amazon -
Amazon Basics 16x25x1 Air Filter 6-Pack
A MERV 11 filter in a 6-pack, sized 16x25x1, with a beverage board frame, wire mesh support and electrostatically charged material that captures particles as small as 3 microns.
View on Amazon
These come from our ranked list Best 16x25x1 Hvac Filter, which compares them spec by spec.
FAQ
Can I wash a disposable pleated furnace filter?
No. Disposable pleated filters are made to be replaced, not washed. Water and soap can damage the pleats and the frame, so slide in a fresh filter of the same size when the old one looks gray or the manual says to change it.
How often should I clean a metal furnace filter?
Clean it when it looks gray or coated with dust, and follow the schedule in the maker's manual. A filter that looks dirty or a furnace that runs longer than usual are signs to check it.
What size replacement filter do I need?
Match the nominal size printed on the old filter's frame, and check the actual size the maker gives. Three of the four filters in the list below are 16x25x1 with an actual size of 15.75 by 24.75 by 0.75 inches, while the Filtrete filter measures 15.68 by 24.68 by 0.81 inches.



