Amazon Black Friday Week deals

Paid link

How-to · Furnace Filters

When to Change a Furnace Filter

Short answer

Change a furnace filter when it looks grey or clogged with dust, when airflow feels weak, or when the schedule in the maker's manual says so. Check the filter often, and keep a spare on hand so you can swap it right away. Match the new filter to the size printed on the old filter's frame.

  1. Look at the filter

    Pull the filter out of its slot and hold it up to the light. Look for dust built up on the pleats and a frame that bends or sags. If the filter looks grey or clogged, change it, and follow the schedule in the maker's manual for the filter you use.

  2. Check the size on the frame

    Read the size printed on the old filter's frame before you buy a new one. The filters shown with this article are 16 by 25 by 1 inches in nominal size, with an actual size a little smaller than the numbers on the box. Check the MERV rating too, and match the rating your furnace manual calls for. A filter that does not fit the slot lets air pass around it instead of through it.

  3. Slide the new filter in

    Switch the furnace off at the thermostat before you touch the filter. Slide the old filter out of its slot and note which way the airflow arrow on its frame points. Slide the new filter in with its airflow arrow pointing toward the furnace or blower, away from the return grille. Push it in until it sits snug in the slot, then switch the furnace back on.

  4. Keep spares on hand

    Keep a spare filter on hand so a dirty one can be swapped right away. The packs shown with this article hold 6 filters, except for the Filtrete pack, which holds 2. Store spares flat in a dry place where the frames stay straight, and check the filter when the seasons change or when dust builds up in the house.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best 16x25x1 Hvac Filter, which compares them spec by spec.

FAQ

How often should I change a furnace filter?

Watch for the signs: a grey filter, dust caked on the pleats, or weak airflow at the vents. Change it when you see those signs, and follow the schedule in the maker's manual for the filter you use.

What size furnace filter do I need?

Read the size printed on the old filter's frame, and match the nominal size and the MERV rating your furnace manual calls for. The filters with this article are 16 by 25 by 1 inches in nominal size, with an actual size a little smaller.

Which way does the airflow arrow point?

Point the arrow on the filter frame toward the furnace or blower, away from the return grille. Slide the filter into the slot with the arrow facing that way, and push it in until it sits snug.

More furnace filters how-tos