How-to · Furnace Filters
How to Change an Air Filter
To remove an air filter, switch the system off at the thermostat, open the filter slot or return grille, and slide the old filter out. Note the size printed on the frame and the direction of the airflow arrow, then slide the new filter in with the arrow pointing toward the furnace or blower. Close the cover and switch the system back on.
Switch the system off
Switch the furnace or air conditioner off at the thermostat before you touch the filter. A running system pulls air through the slot while you work, and the blower can pull dust into the duct. With the system off, the filter slides out without air pushing against it, and you can read the size and the airflow arrow on the frame.
Find the filter slot
Look for the filter slot on the furnace or the return grille on the wall or ceiling. The slot sits where return air enters the system, and the cover may lift off, slide aside or open on a hinge. The Simply filter fits central units or return grilles, and the Amazon Basics filter fits standard furnaces, ACs and HVAC return grilles. If you cannot find the slot, follow the diagram in the maker's manual.
Slide the old filter out
Open the cover and pull the old filter straight out of the slot, keeping it level so dust stays on the filter instead of falling into the duct. Read the size printed on the frame and the direction of the airflow arrow before you throw it away. All four filters here are 16x25x1 in nominal size. Put the old filter in a bag and take it straight to the trash.
Match the new filter size
Match the nominal size on the new filter to the size printed on the old frame, and check the actual size if the slot feels tight. The Simply, Aerostar and Amazon Basics filters list an actual size of 15.75 by 24.75 by 0.75 inches, while the Filtrete filter lists 15.68 by 24.68 by 0.81 inches. A filter that is too small leaves a gap around the frame, and a filter that is too large will not slide into the slot.
Slide the new filter in
Slide the new filter into the slot with the airflow arrow pointing toward the furnace or blower, away from the return grille. The Amazon Basics filter gives this direction in its instructions, and the Simply filter says to follow the airflow arrows. Push the filter in until it sits flat in the slot, then close the cover. Switch the system back on at the thermostat and check that air flows through the vents.
Know when to change it again
Change the filter when it looks grey or clogged with dust, or when the airflow from the vents feels weak. The Filtrete filter says to change it at least once every 90 days, and the Amazon Basics filters are rated for changes every 60 to 90 days. The Simply and Aerostar filters list up to 3 months of filtration. Follow the schedule in the maker's manual for your own system.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Simply 16x25x1 Air Filter
Its MERV 8 rating comes in a 6-pack of 16x25x1 filters, with an actual size of 15.75 by 24.75 by 0.75 inches for home AC and furnace systems.
View on Amazon -
Aerostar Air Filter 16x25x1 MERV 13 AC
Its MERV 13 rating comes in a 6-pack of 16x25x1 filters, with an actual size of 15.75 by 24.75 by 0.75 inches for AC and furnace systems.
View on Amazon -
Filtrete 16x25x1 Air Filter
Its MERV 11 rating with a 1000 MPR comes in a 2-pack of 16x25x1 filters, with an actual size of 15.68 by 24.68 by 0.81 inches.
View on Amazon -
Amazon Basics 16x25x1 Air Filter 6-Pack
Its MERV 11 rating comes in a 6-pack of 16x25x1 filters, with an actual size of 15.75 by 24.75 by 0.75 inches and an electrostatically charged material.
View on Amazon
These come from our ranked list Best 16x25x1 Hvac Filter, which compares them spec by spec.
FAQ
How do I know which size filter to buy?
Read the size printed on the frame of your old filter. All four filters here are 16x25x1 in nominal size, so match the nominal size first and check the actual size if the slot is tight.
Which way does the airflow arrow point?
Toward the furnace or blower, away from the return grille. The Amazon Basics filter gives this direction, and the Simply filter says to follow the airflow arrows. If the arrow points the wrong way, slide the filter out, turn it around and slide it back in.
What does the MERV rating mean?
MERV rates how well a filter captures particles from the air passing through it, with a higher number rating finer capture. The Simply filter is rated MERV 8, the Filtrete and Amazon Basics filters are rated MERV 11, and the Aerostar filter is rated MERV 13.




