How-to · Furnace Filters
How to Replace a Furnace Filter
To replace a furnace filter, switch the furnace off, pull the old filter from its slot or return grille, and note the direction of the airflow arrow printed on its frame. Slide the new filter in with its arrow pointing the same way, toward the furnace or blower, then close the cover and switch the furnace back on. Match the size printed on the old filter frame.
Find the filter slot
The filter sits in a slot on the furnace itself or in a return grille on a wall or ceiling. Look for a hinged cover, a removable panel or a grille with clips or screws. Read the size printed on the frame of the old filter before you pull it out, so the new one matches.
Switch the furnace off
Set the thermostat to off, then follow the steps in the maker's manual for shutting the furnace down before you open the filter slot. This keeps the blower from running while the filter is out. Leave the furnace off until the new filter is in place and the cover is closed.
Pull out the old filter
Open the cover or grille and slide the old filter straight out, holding it flat so loose dust stays on it. Note the direction of the airflow arrow printed on its frame: the arrow points toward the furnace or blower. Set the old filter aside in a bag or on newspaper until you can throw it away.
Slide the new filter in
Check the size on the new filter frame against the old one, then slide it into the slot with the airflow arrow pointing the same way as the old filter, toward the furnace or blower. Push it all the way in so it sits flat and fills the slot with no gaps at the edges.
Close up and switch back on
Close the cover or grille and fasten any clips or screws. Follow the steps in the maker's manual to start the furnace again and set the thermostat to the setting you want. Check that air flows from the vents and listen for rattling, which can mean the filter is loose or the cover is not shut.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Simply 16x25x1 Air Filter
A MERV 8 6-pack in the 16x25x1 size, actual size 15.75 by 24.75 by 0.75 inches, with pleated electrostatic fibers for up to 3 months of filtration.
View on Amazon -
Aerostar Air Filter 16x25x1 MERV 13 AC
A MERV 13 6-pack with electrostatically charged pleated fibers that capture up to 98% of airborne particles, in the 16x25x1 size.
View on Amazon -
Filtrete 16x25x1 Air Filter
A MERV 11 2-pack with a 1000 MPR rating, made to capture microparticles, with a 3-month life and a smart app for 30-, 60- or 90-day reminders.
View on Amazon -
Amazon Basics 16x25x1 Air Filter 6-Pack
A MERV 11 6-pack of electrostatically charged filters that capture particles as small as 3 microns, with the airflow arrow pointing toward the furnace or blower.
View on Amazon
These come from our ranked list Best 16x25x1 Hvac Filter, which compares them spec by spec.
FAQ
How do I know which way the airflow arrow should point?
The arrow points toward the furnace or blower, away from the return grille. Check the arrow on the old filter before you pull it out, and match it when you slide the new one in.
How often should I change a furnace filter?
Change it when it looks grey or clogged with dust, and follow the schedule in the maker's manual for the filter you buy.
What size furnace filter do I need?
Read the size printed on the frame of the old filter, or measure the slot it slides into. Buy the same nominal size, and check the actual size on the new filter matches the old one.




