Amazon Black Friday Week deals

Paid link

How-to · Furnace Filters

Which Side Does an Air Filter Go?

Short answer

The airflow arrow on the filter frame points toward the furnace or blower, away from the return grille. That is the direction the air moves through the filter. Put the filter in with the arrow pointing into the duct toward the furnace, not back toward the room.

  1. Find the filter slot

    Look for the filter where the air returns to the furnace, either in a slot on the furnace cabinet or behind a return grille. Pull the old filter out and note which way its arrow points before you set it aside, since that shows the direction your system uses.

  2. Read the airflow arrow

    The arrow is printed on the filter frame and shows the direction the air moves. It points toward the furnace or blower and away from the return grille, so the side the arrow points away from faces the air coming back from the rooms.

  3. Slide the new filter in

    Match the size printed on the frame of the filter you remove, then slide the new filter into the slot with the arrow pointing toward the furnace. The filter should sit flat in the slot with no gaps around the edges, and the frame should stay square in the opening.

  4. Check the arrow once more

    Look at the arrow again before you close the slot cover or the return grille. If the arrow points back toward the room, pull the filter out, turn it around, and slide it back in so the arrow points toward the furnace.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best 16x25x1 Hvac Filter, which compares them spec by spec.

FAQ

What if I cannot find the arrow on my filter?

Look for the word airflow printed on the frame, and follow the installation guide that comes with the filter. The maker's manual for your furnace also gives the direction for your system.

What happens if the filter goes in backwards?

The filter still sits in the slot, but the airflow arrow shows the direction the maker designed it for. Pull it out and turn it around so the arrow points toward the furnace.

Can the filter go in a return grille?

Yes, if that is where your system takes the filter. The arrow still points toward the furnace, away from the return grille, just as it does in a furnace slot.

How do I know which size I need?

Read the nominal size printed on the frame of the filter you remove and buy the same size. A filter that is too small leaves gaps around the edges, and one that is too large will not fit the slot.

More furnace filters how-tos