How-to · Furnace Filters
Which Way Does an Air Filter Go?
Point the printed airflow arrow toward the furnace or blower, away from the return grille. Air flows from the room, through the return grille, and into the furnace, so the arrow shows that same path. Check the arrow before you slide the filter in, because a filter turned the wrong way still fits the slot.
Find the filter slot
The filter sits in a slot on the furnace or in a return grille on the wall or ceiling. Simply filters fit the filter slot for central units or return grilles. Turn the system off before you open the slot or grille, and keep the old filter nearby so you can match the size printed on its frame.
Read the arrow on the frame
The Simply and Amazon Basics filters carry a printed airflow arrow on the frame. Hold the filter so the arrow points toward the furnace or blower, away from the return grille. On a filter in a return grille, the arrow points away from the room and into the duct. If the arrow is hard to read, use the old filter as a guide and match the direction it faced.
Slide the filter into place
Slide the filter into the slot with the arrow pointing toward the furnace or blower. Push it all the way in until the frame sits flat and the cover or grille closes over it. A filter that bows or leaves a gap lets air pass around the frame, so check that the edges sit flat against the slot. Close the cover or grille and turn the system back on.
Check the fit and the size
The four filters here are nominal 16x25x1. The Simply, Aerostar and Amazon Basics filters state an actual size of 15.75 by 24.75 by 0.75 inches, and the Filtrete filter states an actual size of 15.68 by 24.68 by 0.81 inches. Match the nominal size printed on the old filter frame or the measurements of the slot before you buy a replacement.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Simply 16x25x1 Air Filter
A MERV 8 filter in a 6-pack, nominal 16x25x1, actual size 15.75 by 24.75 by 0.75 inches, with airflow arrows to follow when you slide it in.
View on Amazon -
Aerostar Air Filter 16x25x1 MERV 13 AC
A MERV 13 filter in a 6-pack, nominal 16x25x1, actual size 15.75 by 24.75 by 0.75 inches, with a beverage board frame and moisture-resistant backing.
View on Amazon -
Filtrete 16x25x1 Air Filter
A MERV 11 filter with a 1000 MPR, in a 2-pack, made for 3-month use, with a smart app for 30-, 60- or 90-day reminders.
View on Amazon -
Amazon Basics 16x25x1 Air Filter 6-Pack
A MERV 11 filter in a 6-pack, nominal 16x25x1, actual size 15.75 by 24.75 by 0.75 inches, with an electrostatically charged synthetic material and a beverage board frame.
View on Amazon
These come from our ranked list Best 16x25x1 Hvac Filter, which compares them spec by spec.
FAQ
What happens if the filter goes in the wrong way?
The arrow shows the direction of airflow, so a filter turned the wrong way still fits the slot but faces against the flow. Pull it out, turn it so the arrow points toward the furnace or blower, and slide it back in.
How do I know which size filter to buy?
Match the nominal size printed on the old filter frame or measure the slot. The Simply, Aerostar and Amazon Basics filters here are nominal 16x25x1, and the Filtrete filter is nominal 16x25x1 with an actual size of 15.68 by 24.68 by 0.81 inches.
How often should a furnace filter be changed?
Follow the schedule in the maker's manual. The Simply and Aerostar filters are made for up to 3 months, the Filtrete filter for at least once every 90 days, and the Amazon Basics filter for every 60 to 90 days.
Does the arrow point toward the room or the furnace?
Toward the furnace. The arrow points toward the furnace or blower, away from the return grille, and the filter slides in with the arrow facing that way.




