Amazon Black Friday Week deals

Paid link

How-to · Garment Steamers

Can You Use a Steamer Instead of an Iron

Short answer

Yes, a steamer can replace an iron for removing wrinkles from hanging garments, but it gives a softer finish than a pressed iron. Steam relaxes the fibers without a board, while an iron presses a flat surface for crisp creases. For collars and cuffs, use a steamer with a heated soleplate or creaser, like the Conair, or the dry-iron setting on the YOZLNFO.

  1. What a steamer does well

    A steamer sends steam through hanging fabric, so wrinkles fall out without an ironing board. It suits silk, wool, chiffon, cotton, linen and nylon, and it also works on curtains and upholstery. Hold the steamer head near the fabric and let the steam pass through, then let the garment hang until it dries. A steamer without a heated soleplate or creaser will not press a sharp crease, so it fits garments that need a smooth, soft finish rather than a sharp edge.

  2. Where an iron still wins

    An iron presses fabric flat between a hot soleplate and a board, which makes sharp creases, pressed collars and flat cuffs. A steamer gives a softer finish, so reach for an iron when the garment needs a crisp edge. Two of these steamers close the gap: the Conair has a heated soleplate with a built-in creaser for collars and cuffs, and the YOZLNFO has a dry iron setting for flat ironing.

  3. Match the steamer to the fabric

    Steam settings change how much steam the fabric gets, so pick the setting the garment needs. The Conair has 5 steam settings, and the YOZLNFO has 5 fabric modes with 1 dry iron setting and 4 steam levels. The HiLIFE suits chiffon, silk, wool, cotton, linen and nylon, and the OGHom works on silk, cotton, linen, polyester, wool and blends. Try the steamer on an old garment first, as OGHom advises, before you steam the garment you plan to wear.

  4. Fit the brush and attachments

    Attach the brush or spacer only when the unit is off and no steam comes out of the nozzle, then slide it on so the holes line up with the slots. The Conair comes with 3 attachments: a silicone band that pulls fabric taut, a bristle brush for thicker fabric, and a delicate fabric spacer for fragile garments. The HiLIFE brush clicks onto the steam head: align it, press gently until you hear a click, and pull both ends outward to remove it.

  5. Heat up and steam

    Fill the tank to the fill line and do not go past it. Heat-up runs from 15 seconds on the YOZLNFO to 2 minutes on the HiLIFE, with the OGHom at 30 seconds and the Conair at 40 seconds. Steam output runs from about 10 minutes on the OGHom to up to 20 minutes on the Conair, with the HiLIFE at up to 15 minutes. Use the HiLIFE only in a 110-120V outlet and the YOZLNFO only in a 110V outlet, and check the manual for the outlet each model needs.

  6. Empty the tank and descale

    Unplug the steamer and let it cool, then empty the water left in the tank so scale does not build up. The OGHom tank pops off for refilling and cleaning, and its clear design lets you see the water level. Descale the OGHom monthly with a mix of 50% white vinegar and 50% water. For other models, follow the schedule in the maker's manual.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Clothes Steamer, which compares them spec by spec.

FAQ

Can a steamer press a crease into trousers?

Not on its own. A steamer without a heated soleplate or creaser leaves a soft finish. Use the Conair built-in creaser or the YOZLNFO dry iron setting for a pressed edge.

Can I use a steamer on silk and wool?

Yes. The HiLIFE suits silk and wool, and the OGHom works on silk and wool as well. Try the steamer on an old garment first, as OGHom advises.

How long does a tank of water last?

It depends on the model. The OGHom gives about 10 minutes of steam, the HiLIFE gives up to 15 minutes, and the Conair gives up to 20 minutes. Refill the tank when the steam runs out.

More garment steamers how-tos