Amazon Black Friday Week deals

Paid link

How-to · Garment Steamers

How to Use a Garment Steamer

Short answer

To use a garment steamer, fill the tank with water, plug the steamer into a 110V or 120V outlet, and wait until steam comes from the nozzle. Hang the garment, hold the steamer against the fabric, and move it slowly from top to bottom until the wrinkles fall out. Empty the tank when you finish, and let the steamer cool before you store it.

  1. Fill the water tank

    Lift the tank off the steamer or open its fill cap, then fill it with water up to the fill line. Do not go past the maximum fill line. Put the tank back until it sits flat, and check that no water drips from the seam before you plug the steamer in.

  2. Plug in and wait for steam

    Plug the steamer into a 110V or 120V outlet, and check the voltage on the steamer first if you travel with it. Press the steam button or switch the steamer on, then wait until steady steam comes from the nozzle. If the steamer has a fabric brush, fit it now while the steamer is off and no steam is coming out.

  3. Hang the garment and steam it

    Hang the garment on a hanger or a hook so the fabric hangs straight and you can reach both sides. Hold the steamer against the fabric with the nozzle close to the cloth, and move it slowly from the top of the garment to the bottom. Pull the fabric taut with your free hand as you go, and go over a stubborn crease again from the other side.

  4. Use the brush and attachments

    Use the fabric brush on thicker fabrics, where the bristles help the steam reach into the cloth. On the Conair, use the delicate fabric spacer on fragile garments, and keep the nozzle moving so it does not rest on one spot. Change an attachment only when the steamer is off and no steam is coming out.

  5. Empty the tank and put it away

    Switch the steamer off and unplug it when you finish. Let it cool down, then empty the water left in the tank so it does not sit inside the steamer. Wipe the outside dry with a soft cloth, and store the steamer upright in a dry place with the cord loosely coiled.

  6. Descale it when the manual says so

    Mineral deposits build up in the tank and the steam path over time, and the steamer may spit or give less steam when that happens. If the manual allows it, run white vinegar and water through the steamer to remove the deposits, then run plain water through it until no vinegar smell is left. Follow the schedule in the maker's manual, and never mix cleaners.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Clothes Steamer, which compares them spec by spec.

FAQ

Can I use tap water in a garment steamer?

Yes, if the manual allows it. Fill the tank to the fill line and do not go past it. If your water leaves mineral deposits, descale with white vinegar and water when the manual says so.

Why is my steamer spitting water?

Water can spit when the tank is filled past the fill line, or when mineral deposits have built up inside. Fill only to the line, and descale with white vinegar and water if the manual allows it. Let the steamer heat until steady steam comes out before you start.

Can I steam silk and other delicate fabrics?

Yes. Keep the nozzle moving, and start with a light pass before you steam the whole piece.

Can I use a garment steamer on curtains?

Yes. Hang the curtain so it hangs straight, and steam from top to bottom, pulling the fabric taut as you go.

More garment steamers how-tos