Amazon Black Friday Week deals

Paid link

How-to · Humidifiers

How to Clean an Ultrasonic Humidifier Transducer

Short answer

Unplug the humidifier, empty the tank, and wipe the transducer disk with a soft cloth or the cleaning brush that came with the unit. For mineral buildup, use white vinegar if the manual allows it, then rinse with clean water and let the parts dry before you put them back. The transducer is the metal disk in the base that turns water into mist.

  1. Unplug it and empty the tank

    Unplug the humidifier before you touch any part inside it. Lift the tank off the base and pour out the water left inside. Set the tank and the base where you can reach the disk at the bottom of the water chamber.

  2. Find the transducer disk

    Look inside the base for the round metal disk that sits under the water. That disk vibrates to turn water into mist, and mineral buildup on its face cuts mist output. Do not press it with a finger or a hard tool; touch it only with a soft cloth or the cleaning brush.

  3. Wipe the disk and rinse the tank

    Wipe the disk with a soft damp cloth until the buildup comes off, and use the cleaning brush for the edges around it. If white vinegar is needed for buildup, use it only if the manual allows it, and never mix it with another cleaner. Rinse the tank and the base with clean water so no vinegar stays behind.

  4. Dry it and put it back together

    Let the tank and the base dry before you put them back together, and set the tank back on the base. Fill the tank with water and run the humidifier as the manual directs. If mist output stays low after cleaning, check the manual again or contact the maker.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Ultrasonic Humidifier for Bedroom, which compares them spec by spec.

FAQ

Can I use vinegar to clean the transducer?

Yes, white vinegar only, and only if the manual allows it. Wipe the disk with vinegar, rinse the tank and base with clean water, and never mix vinegar with another cleaner.

How often should I clean the transducer?

Clean it when mist output drops or you see buildup on the disk, and follow the schedule in the maker's manual.

What should I use to wipe the transducer?

A soft cloth or the cleaning brush that came with the humidifier. The Levoit, Pure Enrichment and LasVacde humidifiers here include a cleaning brush. Do not use a hard or sharp tool on the disk.

More humidifiers how-tos