How-to · Humidifiers
How to Clean an Ultrasonic Humidifier with Vinegar
To clean an ultrasonic humidifier with vinegar, unplug it, empty the tank, then fill the tank with white vinegar if the manual allows it and let it sit until the mineral scale loosens. Rinse the tank and the base with water, wipe the mist nozzle and the parts you can reach, and let them dry fully before you refill the tank.
Unplug and empty the tank
Switch the humidifier off and unplug it from the wall before you open it. Pour out the water left in the tank and in the base. Wipe up spills around the unit so the surface under it stays dry. Keep the plug away from water while you clean.
Fill the tank with white vinegar
Pour white vinegar into the tank if the manual allows it, and add vinegar to the base where the water sits. Do not mix the vinegar with other cleaners, and do not add bleach. Put the tank back on the base so the vinegar reaches the parts the water touches. Let it sit until the white scale on the tank and the base starts to loosen.
Scrub the tank and the base
Use a soft brush or a soft cloth to scrub the inside of the tank and the base, working the vinegar over the scale. Brush the mist nozzle and the small parts you can reach, and rinse the cleaning brush after use. Do not use a hard brush on the parts, and do not press on the small disk in the base. If a part will not come clean, contact the maker or a repair service.
Rinse with water and dry
Pour out the vinegar and rinse the tank and the base with water until the vinegar smell is gone. Rinse the mist nozzle and the parts you brushed, then wipe them with a clean cloth. Let the tank and the base dry fully with the parts apart before you put them back together. Do not run the unit until the parts are dry.
Refill and run the humidifier
Fill the tank with fresh water and fit it back on the base. Plug the unit in, switch it on, and check that mist comes from the nozzle. If the mist looks weak or the unit will not run, switch it off, unplug it, and contact the maker or a repair service. Clean the tank again when scale shows on the inside.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Levoit Classic300 Ultrasonic Top Fill Humidifier
Its 6 L tank runs for up to 60 hours per fill, and its top-fill opening reaches the corners for cleaning.
View on Amazon -
Pure Enrichment MistAire Ultrasonic Cool Mist Humidifier
It runs for up to 25 hours per fill and is rated for up to 250 sq ft by the maker, with a disk cleaning brush in the box.
View on Amazon -
MEGAWISE 3.5L Cool Mist Humidifier
Its 3.5 L tank and 24 dB rating suit a bedroom, and its top-fill design and control knob adjust the mist.
View on Amazon -
LasVacde Humidifiers for Bedroom
Its 2.5 L top-fill tank and 28 dB rating suit a bedroom, and its parts come apart for cleaning.
View on Amazon
These come from our ranked list Best Ultrasonic Humidifier for Bedroom, which compares them spec by spec.
FAQ
Can I use vinegar in an ultrasonic humidifier?
Only if the maker's manual allows it. If it does, fill the tank with white vinegar, let it sit until the scale loosens, then rinse the tank and the base with water.
How often should I clean an ultrasonic humidifier?
Clean it when white scale shows on the tank or the base, or when the mist looks weak. Follow the schedule in the maker's manual.
Do I need to rinse the vinegar out?
Yes. Pour out the vinegar and rinse the tank and the base with water until the vinegar smell is gone. Let the parts dry fully before you refill the tank.




