Amazon Black Friday Week deals

Paid link

How-to · Infrared Heaters

How to Use an Infrared Heater

Short answer

To use an infrared heater, set it on a flat floor, plug it into a 120-volt outlet, pick a heat setting, and set the thermostat to the temperature you want. Use the remote or the controls on the heater, and set the timer if your heater has one. Unplug the heater before you move it or clean it.

  1. Place the heater on the floor

    Set the heater on a flat floor in the room you want to warm, with the front facing into the room. Keep the heater clear of bedding, curtains, and cords, and leave space around it so air can move. Do not set the heater on a bed, a rug with a thick pile, or any soft surface that can slow the air flow.

  2. Plug it in and switch it on

    Plug the heater into a 120-volt outlet and switch it on with the controls on the heater or the remote. Each of the four heaters here runs on 1500 watts. Set the thermostat first, then pick a heat setting. The Dr Infrared heater has a thermostat that runs from 50 to 85 degrees, and the RealSmart and WEWARM thermostats run from 50 to 90 degrees.

  3. Pick a heat setting

    Pick the heat setting that fits the room. The RealSmart and WEWARM heaters have three heat settings: 1000 watts, 1500 watts, and an ECO mode. The Heat Storm heater has two power modes, 750 watts and 1500 watts. The Dr Infrared heater has high and low heat with 3 fan speeds. In ECO mode, the RealSmart heater holds 68 degrees.

  4. Set the timer and switch it off

    Set the timer when you want the heater to switch off by itself. The Dr Infrared, RealSmart, and WEWARM heaters each have a 12-hour timer that shuts the heater off after the time you set. Use the remote to change the temperature or the timer without crossing the room. When you finish, switch the heater off, unplug it, and let it cool before you move it or clean it.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Infrared Space Heater, which compares them spec by spec.

FAQ

Can I leave an infrared heater on overnight?

Use the 12-hour timer on the Dr Infrared, RealSmart, and WEWARM heaters to set an automatic shut-off, and follow the maker's manual for overnight use. Unplug the heater when you leave the room for a long time.

What temperature should I set on an infrared heater?

Set the thermostat to the temperature you want and let the heater hold it. The Dr Infrared thermostat runs from 50 to 85 degrees, and the RealSmart and WEWARM thermostats run from 50 to 90 degrees.

What size room can an infrared heater warm?

Compare the maker's rated square feet: the Dr Infrared is rated for 576 sq ft, the RealSmart for 350 sq ft, the WEWARM for 300 sq ft, and the Heat Storm for 150 sq ft.

More infrared heaters how-tos