How-to · Infrared Heaters
Infrared Heater Size for Your Room
Match the heater to the room by comparing the maker's coverage figure, given in square feet, with the floor area you measured. A heater rated for 1,000 sq ft lists a larger coverage figure than one rated for 300 sq ft, so read the figure before you buy. The four heaters here list maker coverage figures between 100 sq ft and 1,000 sq ft.
Measure the room first
Measure the length and width of the room in feet, then multiply them to get the floor area. Write the number down before you shop, and measure each room you plan to heat, since one heater serves one room at a time. A room with high ceilings holds more air than the floor area suggests, and an open doorway lets heat into the next room, so treat the floor area as a starting point, not the full picture.
Read the maker's coverage figure
Each heater lists a coverage figure from its maker, given in square feet. Compare that figure with the floor area you measured, and pick a heater whose figure covers the room. The OSTBA lists 1,000 sq ft, the Heat Storm lists 100 sq ft primary and 500 sq ft secondary, the DR-998 lists 400 sq ft, and the Lifeplus lists 300 sq ft.
Check the heat settings
Look at the heat settings beside the coverage figure. The Lifeplus has 3 heat settings with low at 750W and high at 1500W, and the OSTBA has low heat at 1000W, high heat, an ECO mode and a fan-only mode. Settings change how the heater runs in the room, so read them before you buy.
Place the heater in the room
Set a freestanding heater on the floor where its warmth reaches the seating area, and leave clear space around it. The DR-998, the OSTBA and the Lifeplus are freestanding floor models, while the Heat Storm is a wall-mount model. For a wall-mount model, follow the maker's installation manual. Plug the heater into an outlet the manual allows, and use the remote or the controls to set the temperature.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
DR. INFRARED HEATER DR-998
A 1500W heater with a maker-listed heating coverage of 400 sq ft, a thermostat, a timer and oscillation.
View on Amazon -
Heat Storm HS-1000-WX-WIFI Infrared Wi-Fi Heater
A 1000W wall-mount heater with a maker-listed coverage of 100 sq ft primary and 500 sq ft secondary, and Wi-Fi control.
View on Amazon -
OSTBA 1500W 6 Element Infrared Cabinet Heater
A 1500W heater with a maker-listed coverage of 1,000 sq ft, 6 heating elements, low heat at 1000W and an ECO mode.
View on Amazon -
Lifeplus 1500W Electric Infrared Space Heater
A 1500W heater with a maker-listed coverage of 300 sq ft, 3 heat settings and a 12-hour timer.
View on Amazon
These come from our ranked list Best Infrared Heater for Room, which compares them spec by spec.
FAQ
Can one infrared heater heat two rooms?
No. A heater warms the room it sits in, so measure each room on its own and match the coverage figure to that room.
Does wattage decide the room size?
No. Wattage and coverage are separate figures, so read the maker's coverage figure in square feet beside the wattage. The OSTBA lists 1500W and 1,000 sq ft, while the Lifeplus lists 1500W and 300 sq ft.
What if the heater is too small for the room?
It will run without reaching the temperature you set, so check the coverage figure again and move the heater closer to where you sit, or pick a heater with a larger coverage figure.




