Amazon Black Friday Week deals

Paid link

How-to · Patio Heaters

Infrared vs Propane Patio Heater: Which to Pick

Short answer

Infrared patio heaters run on electricity and warm people and objects directly, while propane patio heaters burn gas from a tank and give off heat with a flame. Pick infrared when the seating stays in one spot near an outlet and you want no tank to change. Pick propane when you want to move the heater around the patio or the seating sits away from an outlet.

  1. How infrared heat differs from propane heat

    An infrared heater turns electricity into radiant heat that warms the people and objects it faces, so the air between the heater and the seat matters less. A propane heater burns gas from a tank and sends heat out with a flame, warming the air and the area around the tower. The four heaters shown here all run on propane, with listed outputs of 46,000 BTU for the Amazon Basics model and 48,000 BTU for the Hykolity and PATIOPIA models. Infrared heaters need an outlet nearby, while propane heaters need a filled tank and a place to store a spare.

  2. What to compare before you pick

    Start with the fuel: an outlet for infrared, a propane tank for the propane models shown here. Then compare the heat output the maker lists, in BTU, and the coverage the maker rates, in square feet. The Amazon Basics model lists 46,000 BTU and heating coverage of 324 square feet, and the PATIOPIA model lists 48,000 BTU and heating coverage of 500 square feet. Also check the height, the wheels and whether the heater fits the spot you have in mind.

  3. When propane fits the patio

    Propane fits when the seating moves around or sits away from an outlet, since the heater carries its own fuel. The Amazon Basics, Hykolity, PATIOPIA and Pamapic models each have wheels, so you can roll the tower to a new spot. The Hykolity model runs 8 to 10 hours on a standard 20 lb propane tank, and its side door gives access to change the tank. Follow the maker's manual for ignition and for the tank, and keep the heater on flat ground.

  4. When infrared fits the patio

    Infrared fits when the seating stays put and an outlet sits close by, since the heater plugs in and needs no tank. The heat goes straight to the people and chairs in front of it, so aim the heater at the seats rather than at open air. A fixed spot near the table or the chairs suits it, and the heater stays where you put it between evenings. Check the manual for the outlet and cord the model needs before you plug it in.

  5. Set up, move and store the heater

    Put the heater where people sit and where the wheels can roll it into place. The Amazon Basics model has a one-touch ignition button and a water tank in the base, and the Hykolity and PATIOPIA models include a cover. The Pamapic model takes about 1 hour to assemble, with wheels for moving it between the patio and the poolside. When the heater is not in use, follow the manual for storage, and fit the cover if the model includes one.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Propane Patio Heater, which compares them spec by spec.

FAQ

Do I need a gas line for a propane patio heater?

No. The Amazon Basics, Hykolity and Pamapic models shown here run on a standard 20 lb propane tank. Follow the maker's manual for fitting and changing the tank.

Can I use a propane patio heater indoors?

No. The models shown here are for outdoor use, so use them outside on a patio, deck, garden or porch. Follow the maker's manual for placement.

What should I check when comparing patio heaters?

Compare the fuel source, the heat output in BTU, the coverage in square feet the maker rates, and the height and wheels. The Amazon Basics model lists 46,000 BTU and 324 square feet of coverage.

More patio heaters how-tos