How-to · Shower Filters
How to Change a Shower Head Filter
To change a shower head filter, shut the water off, open the filter housing, lift out the old cartridge and put in the new one. Inline filters sit on the shower arm, while filtered shower heads hold the cartridge inside the head, so check the maker's manual for your model. Run the water after the swap and check the joints for drips.
Find the filter in your setup
Shower filters come as an inline unit or as a cartridge inside the shower head. The Aquabliss is an inline filter that sits on the shower arm between the arm and the head, while the MyHalos, Cobbe and Jolie are filtered shower heads that hold the cartridge inside the head. Read the maker's manual to find where the cartridge sits before you start.
Shut the water off first
Turn the water off at the shower controls before you open anything. Hold a towel under the joint to catch the water left in the head and arm. Follow the maker's manual to take the head or the filter housing apart, and set the parts down in the order they came off so they go back the same way.
Swap the old cartridge out
Lift the old cartridge out of the housing and note which way it faces. The Aquabliss cartridge fits either direction, so it goes back in either way. Put the new cartridge in place and check the washers, replacing them with the ones from the kit when they look worn. The Aquabliss kit includes replacement washers and thread seal tape.
Put it back and check for drips
Put the housing and head back together as the maker's manual shows, then turn the water on. Watch the joints for drips and run the shower for a short while, checking again after the parts warm up. If a joint drips, shut the water off and follow the manual to re-seat it.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Aquabliss SF100 Daily Revitalize Shower Filter
An inline filter with a Vitamin C media cartridge that fits standard 1/2-inch shower arms and swaps in about two minutes with no tools.
View on Amazon -
MyHalos Filtered Shower Head
A filtered shower head with 3-stage filtration using calcium sulfite, KDF-55 and activated charcoal, with a lifetime warranty.
View on Amazon -
Cobbe Filtered Shower Head with Handheld
A filtered shower head with a handheld, 6 spray modes, a 60 inch hose and a universal G1/2 thread, with KDF-55 and calcium sulfite media.
View on Amazon -
Jolie Filtered Showerhead
A filtered showerhead rated to NSF/ANSI 177 with KDF-55 and calcium sulfite media, 3 spray settings and a 1.8 GPM flow rate.
View on Amazon
These come from our ranked list Best Shower Head Filter, which compares them spec by spec.
FAQ
How often should I change a shower head filter?
Follow the schedule in the maker's manual. The Aquabliss cartridge is rated for 3 to 6 months, and the MyHalos filter is rated for up to 90 days. Change it sooner if the lather feels flatter or the chlorine smell returns.
Do I need tools to change a shower filter?
The Aquabliss swaps in about two minutes with no tools, and the MyHalos fits in under one minute with no tools. The Cobbe installs in 3 minutes with no plumber needed. Check the manual for your model before you start.
Will a shower filter fit my shower arm?
The Aquabliss fits standard 1/2-inch shower arms, the Cobbe uses a universal G1/2 thread, and the Jolie is designed for standard U.S. shower pipes at 1/2 inch NPT. Check the thread size on your arm against the manual before you buy.



