Amazon Black Friday Week deals

Paid link

How-to · Space Heaters

How to Plug In a Space Heater

Short answer

To plug in a space heater, push the plug fully into a wall outlet and switch the heater on. Plug-in models mount right on the outlet, while a heater with a cord plugs in the same way. Set the thermostat and the timer, then check that the heater runs as you set it.

  1. Pick a wall outlet with space around it

    Pick a wall outlet with clear space around it and a flat floor below for a heater with a cord. The Givebest, Brightown and Minetom heaters mount right on the outlet and take no floor space. Keep the front clear so warm air reaches the room, and leave space around the heater.

  2. Plug it straight into the wall outlet

    Push the plug fully into the wall outlet. The Givebest, Brightown and Minetom heaters plug straight into the outlet with a rotating plug, so turn the plug to fit the outlet. The DREO heater has a power cord, so plug the cord into the outlet and keep the cord out of walkways. Do not use an extension cord or a power strip.

  3. Set the thermostat and timer

    Switch the heater on and set the thermostat to the temperature you want. The DREO thermostat runs from 41 to 95 degrees and the Givebest and Minetom thermostats run from 60 to 90 degrees, so pick a setting that fits the room. Set the timer if your model has one: the DREO has a 24-hour timer and the Givebest, Brightown and Minetom heaters have a 12-hour timer.

  4. Check the plug and the heater as it runs

    Check that the plug sits tight in the outlet and the heater runs as you set it. If the plug feels hot or the heater stops, switch it off and unplug it, then read the maker's manual. The DREO ALCI plug cuts off the power on its own, and the Givebest and Brightown heaters have overheat protection that switches them off.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Plug in Electric Heaters, which compares them spec by spec.

FAQ

Can I plug a space heater into an extension cord?

No. Plug the heater straight into a wall outlet and keep the cord out of walkways. If the outlet is too far from where the heater goes, move the heater to an outlet closer to that spot.

Why does my space heater keep switching off?

The heater may be reaching the temperature on its thermostat, or its overheat protection may have switched it off. Check the thermostat setting and read the maker's manual before you plug it back in.

Can I plug in a space heater in the bathroom?

The DREO heater and the Givebest and Brightown heaters are listed for bathroom use. Follow the maker's manual for where to place the heater, and keep it away from water.

More space heaters how-tos