How-to · Space Heaters
How to Use an Electric Heater
To work an electric heater, place it on the floor or mount it as the maker's manual says, plug it into a 120V outlet, switch it on, choose a heat setting and set the thermostat. Use the remote, timer or oscillation where your model has them, and switch it off and unplug it when you are done. The sections below walk through each step.
Set the heater in place
Put a floor model on a flat, level surface in the room you want to heat, with clear space around it and nothing resting against it. Keep the front facing into the room so warm air moves across it. For a wall-mounted model such as the DREO, follow the maker's installation manual instead of hanging it yourself. Check that the cord reaches the outlet without pulling tight.
Plug in the heater
Plug the heater into a 120V outlet. Push the plug in all the way and check that it sits firm in the socket. If the plug or cord looks damaged, do not use the heater; contact the maker or a repair service. Leave the controls off until the plug is in.
Switch it on and choose a setting
Switch the heater on with the power button on the unit or the remote where your model has one. Pick a heat setting from the options your model lists. The Amazon Basics heater has three settings: High at 1500W, Low at 900W, and Fan Only for air without heat. The Lasko tower has two heat settings. Use Fan Only when you want air movement without heat.
Set the thermostat and the timer
Turn the thermostat to the temperature you want and let the heater hold it there. The DR. INFRARED HEATER DR-998 has a digital thermostat from 50°F to 85°F, and each of the four heaters here has an adjustable thermostat. Set the timer where your model has one: the Lasko tower has an 8-hour timer, and the DR-998 has a timer from 1 to 12 hours. The DREO also has an ECO mode that holds the temperature you set.
Use oscillation and the remote
Oscillation spreads warm air across the room. The Amazon Basics heater oscillates 45 degrees, the Lasko tower has widespread oscillation, and the DR-998 oscillates as well. The DREO has 30-degree manual oscillation that you set by hand. Use the remote where your model has one: the Lasko, DR-998 and DREO each come with a remote. The DREO also works with its phone app and Alexa.
Switch it off and clean it
Switch the heater off and unplug it before you clean it. Let it cool, then wipe dust off the outside with a dry, soft cloth, and follow the maker's manual for any part the manual says is washable. If the heater stops working as it should, contact the maker or a repair service instead of opening it.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Amazon Basics Oscillating Ceramic Portable Indoor Space
Its adjustable thermostat, tip-over shutoff and overheat protection pair with three settings, High at 1500W, Low at 900W and Fan Only.
View on Amazon -
Lasko 29" Ceramic Tower Space Heater
Its remote controls two heat settings, oscillation and an 8-hour timer, and its adjustable thermostat and overheat protection come in a 29-inch tower that weighs 7.9 lb.
View on Amazon -
DR. INFRARED HEATER DR-998
Its digital thermostat runs from 50°F to 85°F, its timer runs from 1 to 12 hours, and it has a remote, oscillation, tip-over shutoff and overheat protection.
View on Amazon -
DREO Smart Electric Wall Heater for Indoor
Its ECO mode, digital thermostat and remote work with the DREO app and Alexa, and it is rated for 150 sq ft with 30-degree manual oscillation.
View on Amazon
These come from our ranked list Best Electric Room Heater, which compares them spec by spec.
FAQ
Where should I put an electric heater?
Set a floor model on a flat, level surface with clear space around it and the front facing into the room. For a wall-mounted model, follow the maker's installation manual.
How do I set the temperature on an electric heater?
Use the thermostat control on the unit or the remote where your model has one. The DR-998 has a digital thermostat from 50°F to 85°F, and the DREO has an ECO mode that holds the temperature you set.
Can I leave an electric heater running on a timer?
Yes, where your model has a timer. The Lasko tower has an 8-hour timer, and the DR-998 has a timer from 1 to 12 hours. Set the hours you want and check the heater is running as you expect.
How do I clean an electric heater?
Switch it off and unplug it first, then let it cool and wipe the outside with a dry, soft cloth. Follow the maker's manual for any part the manual says is washable.





