How-to · Upright Vacuums
How Often to Change a Vacuum HEPA Filter
Change a vacuum HEPA filter when it looks grey, when dust or odors come back soon after vacuuming, or when the filter light or app alert asks for it. Follow the schedule in the maker's manual, since the interval differs by model and use. A filter that is tapped clean and still looks grey needs replacing.
Watch for the signs first
A HEPA filter is ready to change when it looks grey or dusty even after you tap it clean, when dust shows up again soon after you vacuum, or when odors come from the vacuum. Some models also have a filter light or an app alert that asks for a new filter. These signs matter more than a set date, since how fast a filter loads up depends on how much you vacuum.
Check the manual for the schedule
Open the manual that came with your vacuum and look for the filter change schedule. The manual states the interval for that model, and it also says whether the filter is washable or must be replaced. Keep the manual near the vacuum so you can check the filter type and part number when it is time to buy a new one.
Take the filter out and look at it
Switch the vacuum off and unplug it before you open the dust cup or filter cover. Lift the filter out and hold it over a trash can, then tap it gently so loose dust falls off. Look at the filter in good light: a grey surface, a torn edge or a bent frame means the filter is worn and needs replacing with the maker's own type.
Wash it only if the manual allows it
Some HEPA filters can be rinsed and some cannot, so read the manual before water touches the filter. If rinsing is allowed, use plain water only, with no soap and no cleaner mixed in. Let the filter dry fully in open air before it goes back in, since a damp filter can hold dust and odors.
Fit the new filter the right way
Slide the new filter into its slot the same way the old one sat, and check that it sits flat with no gaps around the edges. Close the dust cup or filter cover until it sits flush, then plug the vacuum back in and switch it on. If the vacuum has a filter light or app alert, reset it as the manual says.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Shark ZU102 Rotator Pet Upright Vacuum
Its HEPA filter sits in a sealed system with a 2.9 L dust cup, and its self-cleaning brushroll clears hair without wrapping.
View on Amazon -
Bissell Pet Hair Eraser DualBrush Upright Vacuum
Its two brush rolls work together, one agitating and the other conforming, and its Lift-Off pod comes off for stairs and hard-to-reach areas.
View on Amazon -
Sanitaire Force Upright Commercial Vacuum SC5845D
Its HEPA filter on the exhaust is washable, and its removable dirt cup holds 3.5 quarts of dirt and debris.
View on Amazon -
Eureka Lightweight Vacuum Cleaners for Home
Its dual cyclone technology handles larger debris and smaller dirt, and its LED headlights spot dust and debris you might otherwise miss.
View on Amazon
These come from our ranked list Best Upright Vacuum Cleaner for Basement, which compares them spec by spec.
FAQ
Can I wash a vacuum HEPA filter with water?
Only if the maker's manual says the filter is washable. The Sanitaire Force has a washable HEPA filter on the exhaust. If yours is not washable, tap off the dust and replace it when it stays grey.
How do I know the HEPA filter is worn out?
Look for a grey filter, dust that returns soon after vacuuming, or odors from the vacuum. A torn or bent filter also needs replacing with the maker's own type.
Does a full dust cup mean the filter needs changing?
No. Empty the dust cup first, then tap the filter clean over a trash can. If the filter still looks grey, replace it as the manual says.



