How-to · Upright Vacuums
How to Service a Vacuum Cleaner
To service a vacuum cleaner, unplug it, empty the dust bin or cup, clear hair from the brushroll, check the hose for blockages, and clean or replace the filter as the maker's manual says. Work through one part at a time and put each part back the way it came out. If a part inside the machine needs repair, contact the maker or a repair service.
Unplug and empty the bin
Unplug the vacuum before you touch any part of it. Lift out the dust bin or cup and empty it over a trash can, tapping it until the dust falls out. Wipe the inside of the empty bin with a dry cloth and check the seal around its rim for wear. Put the bin back the way it came out and check that it clicks or sits flat in place.
Clear the brushroll and hose
Turn the vacuum over on a towel and look at the brushroll. Pull or cut away wrapped hair and string, then turn the brushroll by hand to check that it spins freely. Look through the hose for blockages and push out anything caught inside with a long, soft tool. Check the brushroll and the hose ends for wear, and replace a worn part with the maker's own part.
Clean or replace the filter
Take the filter out and tap it clean over a trash can. Rinse it only if the maker's manual says it is washable, and let it dry fully before it goes back in. A filter that still looks grey or lets dust through after tapping needs replacing with the maker's own type. Put the filter back the way it came out and check that it sits flat in its housing.
Check the parts and run it
Put every part back and check that each one sits flat and clicks into place. Look over the cord for damage and check that the plug fits the outlet. Plug the vacuum into a 120V outlet and run it over a small patch of floor to check that it picks up dust and the brushroll turns. If the vacuum still loses suction or makes a new noise, contact the maker or a repair service instead of opening the machine.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Shark ZU102 Rotator Pet Upright Vacuum
A bagless upright with a 2.9 L dust cup, a HEPA filter, a self-cleaning brushroll and a hose that extends for up to 12 feet of reach.
View on Amazon -
Bissell Pet Hair Eraser DualBrush Upright Vacuum
An upright with two brush rolls, a HEPA filter, FurFinder headlights and a lift-off pod for stairs.
View on Amazon -
Sanitaire Force Upright Commercial Vacuum SC5845D
A bagless upright with a washable HEPA filter, a 3.5-quart dirt cup, a 15-inch cleaning path and a hose, wand and crevice tool.
View on Amazon -
Eureka Lightweight Vacuum Cleaners for Home
A lightweight upright with swivel steering, LED headlights, a manually controlled brushroll and a pet turbo brush.
View on Amazon
These come from our ranked list Best Upright Vacuum Cleaner for Basement, which compares them spec by spec.
FAQ
How often should I service my vacuum cleaner?
Service it when suction drops, the brushroll stops turning, or the filter stays grey after tapping, and follow the schedule in the maker's manual. A full bin or a blocked hose causes the same signs, so check those first.
Can I wash the filter with water?
Only if the maker's manual says the filter is washable. If it is, let it dry fully before you put it back. If it is not, tap it clean and replace it when it stays dirty.
Why does my vacuum lose suction?
A full bin, a blocked hose, a hair-wrapped brushroll or a dirty filter are the first things to check. Clear each one in turn, then check the manual for the next step if suction stays low.



