Amazon Black Friday Week deals

Paid link

How-to · Water Leak Detectors

How Water Leak Detectors Work

Short answer

A water leak detector watches for water where it should not be and alerts you when it finds it. A floor sensor sounds an alarm when water reaches it, and some send the alert to your phone. Whole-home monitors watch the main water line instead, tracking flow and pressure and shutting off the water when a leak appears.

  1. Water touches a sensor and sets off an alarm

    A floor detector watches for water touching its base. The Flood Buzz sounds its alarm the moment water contacts the two metal prongs on its base, at up to 95 dB. The GoveeLife and YoLink sound a 105 dB alarm at the leak. Put the Flood Buzz prongs flat on the floor where water would run first.

  2. Alerts reach your phone

    An alarm at the leak helps only if you hear it. The GoveeLife, YoLink and Moen also send the alert to your phone. The GoveeLife sends SMS, email and app push alerts, and its app can silence the alarm with one tap and help find a misplaced sensor with beeps. The YoLink sends app, email and SMS alerts and lets you name each sensor by location. The Moen sends alerts through the Moen Flo App.

  3. Some detectors shut the water off

    Some detectors do more than alert you: they stop the water. The Moen Flo installs on the main water line, monitors flow, pressure and temperature, runs daily MicroLeak tests and shuts off the water when it finds a leak. The YoLink sensors can trigger YoLink sirens or shutoff valves directly, even without internet, through YoLink Control-D2D. Check the maker's manual before you rely on a shutoff, and follow its installation manual.

  4. Where to put a detector

    Put a floor detector where water would pool first: under a sink, behind a toilet, beside a water heater, under a dishwasher or at the low point of a drain pan. The Flood Buzz fits in those spots at 1.75 by 1.5 by 1.5 inches, and its prongs sit flat on the floor in the most likely path of a leak. For whole-floor coverage, place two units together. Check the replace-by date on the housing and swap in a fresh unit when it is due.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Water Leak Detector, which compares them spec by spec.

FAQ

Do water leak detectors need Wi-Fi to work?

The YoLink sensors work even without internet and can trigger sirens or shutoff valves directly. The GoveeLife gateway only supports 2.4G Wi-Fi, so check the maker's manual for how its alerts reach you.

How long do the batteries in a leak detector last?

The GoveeLife battery lasts for 5 years, and each YoLink sensor runs up to 5 years on 2 AAA batteries. The Flood Buzz battery is sealed inside and lasts up to 3 years, with a replace-by date on the housing.

Where should I put a water leak detector?

Under a sink, behind a toilet, beside a water heater, under a dishwasher or in a basement. Set it on the floor where water would run first, at the low point of a drain pan.

More water leak detectors how-tos